Bedienungsanleitung Garmin VOLVO PENTA GLASS COCKPIT Gpsmap 722 (Seite 47 von 74) (Englisch)

691428

Zoom out

Zoom in

Vorherige Seite

1/74

Nächste Seite

Following an Orbit Pattern

You can use the orbit pattern to steer the boat in a continuous

circle around the active waypoint. The size of the circle is

defined by your distance from the active waypoint when you

begin the orbit pattern.

From the autopilot screen, select Menu > Pattern Steering >

Orbit.

Select Engage Port or Engage Starboard.

Setting Up and Following the Cloverleaf Pattern

You can use the cloverleaf pattern to steer the boat to

repeatedly pass over an active waypoint. When you begin the

cloverleaf pattern, the autopilot drives the boat toward the active

waypoint and begins the cloverleaf pattern.

You can adjust the distance between the waypoint and the

location where the autopilot turns the boat for another pass over

the waypoint. The default setting turns the boat at a range of

1000 ft. (300 m) from the active waypoint.

From the autopilot screen, select Menu > Pattern Steering >

Cloverleaf.

If necessary, select Length, and select a distance.

Select Engage Port or Engage Starboard.

Setting Up and Following a Search Pattern

You can use the search pattern to steer the boat in increasingly

larger circles outward from the active waypoint, forming a spiral

pattern. When you begin the search pattern, the autopilot drives

the boat to the active waypoint and begins the pattern.

You can adjust the distance between each circle in the spiral.

The default distance between circles is 50 ft. (20 m).

From the autopilot screen, select Menu > Pattern Steering >

Search.

If necessary, select Search Spacing, and select a distance.

Select Engage Port or Engage Starboard.

Cancelling a Steering Pattern

• Physically steer the boat.

• Select or to cancel a pattern using step steering mode.

• Select Standby.

Enabling the Autopilot Controls on a Garmin

Watch

You can control the Garmin autopilot with a compatible Garmin

watch. Go to garmin.com for a list of compatible Garmin

watches.

NOTE: Smart notifications are not available on your watch when

the autopilot remote control is enabled.

Select Communications > Wireless Devices > Connect

IQ™ Apps > Autopilot Control > Enable > New

Connection.

Follow the on-screen instructions.

Customizing the Autopilot Button Actions

Before you can set the autopilot button actions, you must install

and configure a compatible Garmin autopilot.

You can select up to three autopilot actions for your Garmin

watch to perform.

NOTE: Available autopilot actions depend on the autopilot

installed.

On the chartplotter, select Communications > Wireless

Devices > Connect IQ™ Apps > Autopilot Control >

Button Actions.

Select a button.

Select an action.

Reactor

™

Autopilot Remote Control

WARNING

You are responsible for the safe and prudent operation of your

vessel. The autopilot is a tool that enhances your capability to

operate your boat. It does not relieve you of the responsibility of

safely operating your boat. Avoid navigational hazards and

never leave the helm unattended.

You can wirelessly connect a Reactor autopilot remote control to

the chartplotter to control the compatible Reactor autopilot

system.

For more information about using the remote, see the Reactor

autopilot remote control instructions at garmin.com

Pairing a Reactor Autopilot Remote Control With a

Chartplotter

Select Settings > Communications > Wireless Devices >

Wireless Remotes > Autopilot Remote.

If necessary, select Enable.

Select New Connection.

On the remote control, select > Pair with MFD.

The chartplotter beeps and shows a confirmation message.

On the chartplotter, select Yes to complete the pairing

process.

Changing the Functions of the Reactor Autopilot

Remote Control Action Keys

You can change the patterns or actions assigned to the Reactor

autopilot remote control action keys.

Select Settings > Communications > Wireless Devices >

Wireless Remotes > Autopilot Remote > Button Actions.

Select an action key to change.

Select a pattern or action to assign to the action key.

Updating the Reactor Autopilot Remote Control

Software

You can update the Reactor autopilot remote control software

using the chartplotter.

Insert a memory card into the card slot on the computer.

Go to buy.garmin.com/p/636376, and select Software.

Select Download.

Read and agree to the terms.

Select Download.

Choose a location, and select Save.

Double-click the downloaded file.

Select Next.

Select the drive associated with the memory card, and select

Next > Finish.

On the chartplotter, insert the memory card into the card slot.

Select Settings > Communications > Wireless Devices >

Wireless Remotes > Autopilot Remote > Update

Software.

Force

™

Trolling Motor Control

WARNING

Do not run the motor when the propeller is out of the water.

Contact with the rotating propeller may result in severe injury.

Do not use the motor in areas where you or other people in the

water may come into contact with the rotating propeller.

Always disconnect the motor from the battery before cleaning or

servicing the propeller to avoid injury.

Force

™

Trolling Motor Control 39

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin VOLVO PENTA GLASS COCKPIT Gpsmap 722 Seite 47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin VOLVO PENTA GLASS COCKPIT Gpsmap 722

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info