Bedienungsanleitung Garmin VOLVO PENTA GLASS COCKPIT GPSMap 8000 (Seite 26 von 66) (Englisch)

691431

Zoom out

Zoom in

Vorherige Seite

1/66

Nächste Seite

• To record the track based on a time interval, select Time >

Change, and enter the time interval.

• To record the track plot based on a variance from your

course, select Resolution > Change, and enter the

maximum error allowed from the true course before

recording a track point. This is the recommended

recording option.

Boundaries

Boundaries allow you to avoid or remain in designated areas in

a body of water. You can set an alarm to alert you when you

enter or exit a boundary.

You can create boundary areas, lines, and circles using the

map. You can also convert saved tracks and routes into

boundary lines. You can create a boundary area using

waypoints by creating a route from the waypoints, and

converting the route into a boundary line.

You can select a boundary to act as the active boundary. You

can add the active boundary data to the data fields on the chart.

Creating a Boundary

Select Info > User Data > Boundaries > New Boundary.

Select a boundary shape.

Follow the on-screen instructions.

Converting a Route to a Boundary

Before you can convert a route to a boundary, you must create

and save at least one route (Creating and Saving a Route,

page 15).

Select Info > User Data > Routes & Auto Guidance Paths.

Select a route.

Select Review > Edit Route > Save as Boundary.

Converting a Track to a Boundary

Before you can convert a track to a boundary, you must record

and save at least one track (Saving the Active Track, page 17).

Select Info > User Data > Tracks > Saved Tracks.

Select a track.

Select Select > Edit Track > Save as Boundary.

Editing a Boundary

Select Info > User Data > Boundaries.

Select a boundary.

Select Review > Edit Boundary.

Select an option:

• To edit the appearance of the boundary on the chart,

select Display Options.

• To change the boundary lines or name, select Edit

Boundary.

• To edit the boundary alarm, select Alarm.

Linking a Boundary to a SmartMode Layout

You can link a boundary to a SmartMode layout to automatically

open the layout when entering or exiting the boundary. For

example, you can set a boundary around your marina, and

automatically open the Docking layout when you approach the

marina.

Select Info > User Data > Boundaries.

Select a boundary.

Select Review > Link SmartMode™ > SmartMode™.

Select Entering, and select a layout.

Select Exiting, and select a layout.

Setting a Boundary Alarm

Boundary alarms alert you when you are within a specified

distance of a set boundary.

Select Info > User Data > Boundaries.

Select a boundary.

Select Alarm > On.

Enter a distance.

Deleting a Boundary

Select Info > User Data > Boundaries.

Select a boundary.

Select Review > Edit Boundary > Delete.

Synchronizing User Data Across the Garmin

Marine Network

NOTICE

Before you synchronize the user data across the network, you

should backup your user data to prevent possible data loss. See

Backing Up Data to a Computer, page 49.

You can share waypoints, tracks, and routes with all compatible

devices connected to the Garmin Marine Network (Ethernet)

automatically.

NOTE: This feature is not available on all models.

Select Settings > Preferences > User Data Sharing > On.

If a change is made to a waypoint, track, or route on one

chartplotter, that data is synchronized automatically across all

chartplotters on the Ethernet network.

Deleting All Saved Waypoints, Routes, and

Tracks

Select Info > User Data > Clear User Data > All > OK.

Sailing Features

Setting the Vessel Type

You can select your boat type to configure the chartplotter

settings and to use features customized for your boat type.

Select Settings > My Vessel > Vessel Type.

Select an option.

Sail Racing

You can use the device to increase the likelihood that your boat

will cross the start line of a race exactly when the race begins.

When you synchronize the race timer with the official race

countdown timer, you are alerted at one-minute intervals as the

race start approaches. When you combine the race timer with

the virtual start line, the device measures your speed, bearing,

and remaining time on the countdown timer. The device uses

this data to indicate whether your boat will cross the start line

before, after, or at the correct time to start the race.

Starting Line Guidance

Sailing start line guidance is a visual representation of the

information you need to cross the start line at the optimal time

and speed.

After you set the starboard and port start line pins, and the

target speed and time, and after you start the race timer, a

predictor line appears. The predictor line extends from your

current location toward the start line and the laylines that extend

from each pin.

The end point and color of the predictor line indicate where the

boat will be when the timer expires, based on your current boat

speed.

When the end point is before the start line, the line is white. This

indicates the boat must increase speed to reach the start line on

time.

18 Sailing Features

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin VOLVO PENTA GLASS COCKPIT GPSMap 8000 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin VOLVO PENTA GLASS COCKPIT GPSMap 8000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info