Bedienungsanleitung Garmin VOLVO PENTA GLASS COCKPIT GPSMap 8000 (Seite 28 von 66) (Englisch)

691431

Zoom out

Zoom in

Vorherige Seite

1/66

Nächste Seite

relative position from the heading or course over ground, which

are helpful for casting or finding reference points.

You can show the heading line and the course over ground

(COG) line on the chart.

COG is your direction of movement. Heading is the direction the

bow of the boat is pointed, when a heading sensor is connected.

From a chart, select Menu > Layers > My Vessel > Heading

Line.

Angle Markers

If necessary, select Source, and select an option:

• To automatically use the available source, select Auto.

• To use the GPS antenna heading for COG, select GPS

Heading (COG).

• To use data from a connected heading sensor, select

North Reference.

• To use data from both a connected heading sensor and

the GPS antenna, select COG and Heading.

This displays both the heading line and the COG line on

the chart.

Select Display, and select an option:

• Select Distance > Distance, and enter the length of the

line shown on the chart.

• Select Time > Time, and enter the time used to calculate

the distance your boat will travel in the specified time at

your present speed.

Sonar Fishfinder

When properly connected to a transducer, your compatible

chartplotter can be used as a fishfinder. Chartplotter models

without an xsv or xs in their names require a Garmin sounder

module and transducer to display sonar information.

For more information about which transducer is best for your

needs, go to www.garmin.com/transducers.

Different sonar views can help you view the fish in the area. The

sonar views available vary depending on the type of transducer

and sounder module connected to the chartplotter. For example,

you can view certain Panoptix

™

sonar screens only if you have a

compatible Panoptix transducer connected.

There are four basic styles of sonar views available: a full-

screen view, a split-screen view that combines two or more

views, a split-zoom view, and a split-frequency view that

displays two different frequencies. You can customize the

settings for each view in the screen. For example, if you are

viewing the split-frequency view, you can separately adjust the

gain for each frequency.

If you do not see an arrangement of sonar views to suit your

needs, you can create a custom combination screen (Creating a

New Combination Page, page 3) or a SmartMode layout (Adding

a SmartMode Layout, page 3).

Stopping the Transmission of Sonar Signals

From a sonar screen, select Menu > Transmit.

Changing the Sonar View

From a combination screen or SmartMode layout with sonar,

select the window to change.

Select Menu > Change Sonar.

Select a sonar view.

Traditional Sonar View

There are several full-screen views available, depending on the

equipment connected.

The full-screen Traditional sonar view show a large image of the

sonar readings from a transducer. The range scale along the

right side of the screen shows the depth of detected objects as

the screen scrolls from the right to the left.

Depth information

Suspended targets or fish

Bottom of the body of water

Split-Frequency Sonar View

In the split-frequency sonar view, one side of the screen shows

a full-view graph of high frequency sonar data, and the other

side of the screen shows a full-view graph of lower frequency

sonar data.

NOTE: The split-frequency sonar view requires the use of a

dual-frequency transducer.

Split-Zoom Sonar View

The split-zoom sonar view shows a full-view graph of sonar

readings, and a magnified portion of that graph, on the same

screen.

Garmin ClearVü Sonar View

NOTE: To receive Garmin ClearVü scanning sonar, you need a

compatible chartplotter or fishfinder and a compatible

transducer. For information about compatible transducers, go to

www.garmin.com/transducers.

Garmin ClearVü high-frequency sonar provides a detailed

picture of the fishing environment around the boat in a detailed

representation of structures the boat is passing over.

Traditional transducers emit a conical beam. The Garmin

ClearVü scanning sonar technology emits two narrow beams,

similar to the shape of the beam in a copying machine. These

beams provide a clearer, picture-like image of what is beneath

the boat.

SideVü Sonar View

NOTE: Not all models provide built-in SideVü sonar support. If

your model does not provide built-in SideVü sonar, you need a

compatible sounder module and compatible SideVü transducer.

If your model does provide built-in SideVü sonar, you need a

compatible SideVü transducer.

SideVü scanning sonar technology shows you a picture of what

lies to the sides of the boat. You can use this as a search tool to

find structures and fish.

20 Sonar Fishfinder

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin VOLVO PENTA GLASS COCKPIT GPSMap 8000 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin VOLVO PENTA GLASS COCKPIT GPSMap 8000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info