Bedienungsanleitung Garmin Zumo XT (Seite 8 von 30) (Englisch)

730371

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

Slower traffic: the device plays a tone and displays the

distance to slower traffic when you approach slower traffic at

a higher speed. Your device must be receiving traffic

information to use this feature.

Break planning: the device plays a tone and suggests

upcoming rest stops after you have been driving for more

than two hours without stopping.

Enabling or Disabling Rider Alerts

You can turn off individual audible rider alerts. Visual alerts

appear even when the audible alert is disabled.

Select Settings > Driver Assistance > Rider Alerts.

Select or clear the tick box next to each alert.

Red light and speed cameras

NOTICE

Garmin is not responsible for the accuracy of or the

consequences of using a red light or speed camera database.

NOTE: this feature is not available for all regions or product

models.

Information about red light and speed camera locations is

available in some areas for some product models. The device

alerts you when you approach a reported speed or red light

camera.

• In some areas, your device can receive live red light and

speed camera data while connected to a smartphone running

the Garmin Drive app.

• You can use the Garmin Express

™

software (garmin.com

/express) to update the camera database stored on your

device. You should update your device frequently to receive

the most up-to-date camera information.

Incident Detection and Notifications

WARNING

The device allows you to send your location to an emergency

contact. This is a supplementary feature and should not be

relied upon as a primary method to obtain emergency

assistance. The Garmin Drive app does not contact emergency

services on your behalf.

Your zūmo device uses built-in sensors to detect a possible

vehicle incident.

• If you set up an incident contact, the device can send an

automated text message to that contact when it detects an

incident and your vehicle stops moving. This can help alert

the contact to your situation if you are not able to call or send

a message. This feature requires a connection to the Garmin

Drive app and an active mobile data connection to send a

message.

• If you have not set up an incident contact, the device

automatically displays the nearest address or geographic

coordinates when it detects an incident. This feature is

helpful if you need to tell emergency personnel your location.

• If you have an inReach

device connected to your zūmo

device, you can manually send an SOS when it detects an

incident.

Setting Up an Incident Contact

Before you can set up an incident detection contact, you must

complete these tasks:

• Connect your device to Garmin Drive (Pairing Your Phone

and Headset, page 13).

• Select Settings > Wireless Networks and verify that the

Phone calls option is enabled for your phone.

The device must have access to the Garmin Drive app and to

your smartphone phone book during the incident contact setup.

If you do not want to use your device for hands-free calling, you

can disable the Phone calls option after the incident contact

setup is complete.

Select Settings > Driver Assistance > Incident

Notification > Continue.

A list of your smartphone contacts appears.

Select a contact, and select Next.

Verify the contact's phone number, and select Next.

Enter your name or nickname, and select Done.

Review the sample incident message, and select Next.

Follow the on-screen instructions to inform your contact that

you have added them as an incident contact.

NOTE: the incident notification message includes the name

or nickname you entered, but it is not sent from your phone

number. The message is sent using a third-party service, and

you should inform your incident contact that the incident

message will come from an unknown number.

Select OK.

Review the information, and select Save.

Cancelling an Incident Notification

When the device detects an incident, a message and a voice

prompt inform you that a notification will be sent to your incident

contact. A 60-second countdown timer starts when the incident

is detected, and the device sends the notification automatically

when the timer expires. If you do not want to send the

notification, you can cancel it.

Before the timer expires, select Cancel.

Disabling Incident Notifications

While incident notifications are disabled, the device does not

send an SMS notification when it detects an incident.

Select Settings > Driver Assistance > Incident

Notification.

Clear the Incident Detection SMS tick box.

inReach Remote

The inReach remote function allows you to control your inReach

satellite communication device (sold separately) using your

zūmo device. You can send messages, view weather reports,

trigger an SOS alert and more. Go to buy.garmin.com to

purchase an inReach device.

Connecting an inReach Device

Bring the inReach device within 3 m (10 ft.) of your zūmo

device.

On your zūmo device, select Apps > inReach.

Follow the on-screen instructions on your zūmo device to

complete the pairing process.

After the pairing process is complete, the inReach and zūmo

devices connect automatically when they are within range.

Sending an inReach Message

Before you can send an inReach message using your zūmo

device, you must pair it with a compatible inReach device

(Connecting an inReach Device, page 4).

You can use your device to send inReach messages to your

contacts.

Select Apps > inReach > .

Select New Message.

Select Select Contacts to add one or more contacts.

Enter a message.

Select Send.

4 Rider Awareness Features and Alerts

Garmin Zumo XT Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Zumo XT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info