714633
42
Zoom out
Zoom in
Vorherige Seite
1/52
Nächste Seite
42
Place the filter basket with the dark base facing downwards in the centre of the pulp
container onto the drive shaft coupling. Then turn the filter basket, until it settles down
and press the filter basket further down, until it engages on the drive shaft coupling
with a click.
Place the cover onto the pulp container with the arrow on the lower brim of the cover
aligned exactly over the arrow on the upper brim of the pulp container. The cover
engages onto the pulp container, when it is assembled correctly.
Fold the two locking arms upwards and hook the locking arms into the protrusions
of the cover. Then lock the locking arms by pressing the lower end of the locking
arms without violence into the motor base. The cover must be locked stable onto the
pulp container now.
Tip: If you cannot lock the locking arms, the cover or pulp container are not assem-
bled correctly. Try again observing the position of the arrows on the parts.
Put the pusher into the feed chute. This can only be done in two orientations.
Ensure that the drip-stop spout of the juice outlet is in the open position with the pro-
trusion facing downwards.
Place the juice jug under the juice outlet. Then close the juice jug with the lid.
However, you may place any other suitable container under the juice outlet.
The appliance is now ready for operation.
TIP: Proceed reversely for removing the individual parts.
Processing Your Food
Prepare the »Easy Juicer Fun« for operation as described in the section above. Pre-
pare your food (see: ‘Tips for Best Results’). Remove all inedible parts and cut your
food in pieces of sufficient size (approx. 5-6 cm).
Ensure that a suitable juice container is placed under the juice outlet and the drip-
stop spout is in the open position.
Insert the power plug of the appliance in the wall power outlet. The ON/OFF button
will flash red.
Touch the ON/OFF button for approx. 5 seconds to switch ON the appliance.
The LCD screen will be activated, showing the already elapsed working time (00:00
on start-up). Additionally, the right speed button
starts flashing (standby mode).
Note:
The delay of 5 seconds for switching ON the appliance is intended as a child safe-
ty interlock to prevent little children from activating the appliance. If you touch the
ON/OFF button in standby mode again, the appliance will switch OFF.
42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Gastroback 40125 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info