Bedienungsanleitung Gastroback 40125 (Seite 43 von 52) (Deutsch, Englisch)

714633

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

Note:

For selecting an appropriate speed, see: ‘Properties of Your New »Easy Juicer

Fun«’.

IMPORTANT: The motor will start agitating immediately, when you touch the right

speed button . With the motor running, be aware that the appliance may move

around on the table or counter due to vibrations. Thus, ensure to keep the appliance

in an appropriate distance to the edge of the working space. After switching ON

the motor immediately fill in your food. You should NOT leave the motor operate

with empty feed chute for more than 1 minute.

Touch the right speed button

to switch ON the motor. Speed 1 will be shown on

the LCD display and the working time display will start running. When touching the

right speed button again, the speed will be increased in steps. To decrease the

speed, touch the left speed button . Select the appropriate speed (see: ‘Properties

of your new »Easy Juicer Fun«’).

WARNING – Risk of Injuries: During operation, very sharp blades are agita-

ting on high speed at the bottom of the filter basket. Additionally, parts of your food

could splash out of the feed chute. Thus, during operation, DO NOT place your fin-

gers or any foreign objects into the feed chute. Do not hold your face over the feed

chute.

Take the pusher out of the feed chute and fill the prepared food into the feed chute.

However, at the maximum, fill the feed chute up to 2 cm beneath the brim, so you

can still insert the pusher. Use the pusher to push down the food only slightly.

Note:

Do not apply too much pressure onto the pusher, as this could decrease the quality

and amount of the juice and even cause the appliance to get blocked. The very

best method of processing is to drive the pusher slightly up and down repeatedly

until the feed chute is empty.

When the feed chute is empty, before processing the next portion, ensure that the

juice jug and pulp container can still absorb a sufficient amount of juice and pulp.

Do not fill the provided juice jug with more than 1000 ml (1 litre) to avoid

overflow. To empty the juice jug, simply take it out from under the juice out-

let. For this you may turn the protrusion on the drip-stop spout upwards to

avoid the spilling of juice. Ensure to turn the protrusion back down-

ward to open the drip-stop spout before juicing another portion of food.

To empty the pulp container, always switch OFF the appliance first (touch the ON/

OFF button twice until the ON/OFF button flashes), then unplug the appliance and

wait until the motor comes to a standstill. Disassemble the pulp container according to

the instructions in chapter ‘Care and Cleaning’ (see: ‘Disassembling the Appliance’).

After emptying juice jug and/or pulp container, ensure that you made the juicer

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gastroback 40125 Seite 43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info