5. Pull the plug out of the power outlet.
6. Take the lid off the container and pour out the water. Stubborn residues you can
remove using a nylon washing brush or sponge.
WARNING: Pay attention not to cut yourself cleaning around the blade or cleaning the blade.
IMPORTANT: The container should be clean now. For the case that there are
stubborn residues on the container or the blade, disassemble the container and clean
the single unit (see ´Assembling and disassembling the appliance`). Soak the units in
warm soapy water.
7. Clean the lid and the refill lid with soapy water.
8. Rinse the container, the lid, and the refill lid with clear water and dry the units
thoroughly and carefully with a cloth or l
eave all parts dry naturally where they are out
of reach of young children.
Clean the 300 ml glass container as per description that follows.
Disassembling the container and removing stubborn residues
WARNING:
The blade is very sharp! Do not touch the blade. To handle the blade,
always hold on to the sealing ring.
1. Take the container off the motorblock and hold it over the sink. Remove the holder
turning it anticlockwise. Take the holder off the container and remove the blade.
ATTENTION: The container might be connected really tight to the holder. Do not use
force unscrewing it.
2. Rinse all units in warm soapy water. Soak stubborn residues for a few minutes and
then remove them using a nylon washing brush or sponge. Do not cut yourself.
Beware not to damage the sealing ring. If you can not get the sealing ring clean
or if it is porous or damaged you have to replace it. Contact your vendor for
replacement units.
3. After cleaning rinse all parts with clear water and dry them carefully. You can also
l
eave all parts dry naturally where they are out of reach of young children. When the
units are dry assemble the container for storage or usage.
33
40993_mixmax_manual.qxp 20.12.2006 11:11 Seite 33
