Bedienungsanleitung Gastroback 42438 (Seite 58 von 80) (Deutsch, Englisch)

714679

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

• too little water in the kettle. Always observe the MIN filling level (0.5 litre). Please

keep in mind, that water will vaporize, when left for a long time in the kettle on high

temperature. Observe the filling level during operation.

If overheating occurs, the kettle will automatically switch off the heating elements. In this

case, remove the kettle from the base and pour out the water. Then leave the kettle cool

down by waiting at least 30 minutes. Thereafter, you can reactivate the appliance.

BEFORE FIRST USE

WARNING: DO NOT let young children play with the appliance or any part

of it! The glass parts (kettle, glass insert, glass lid) are fragile. Always use special

care when handling the glass parts. Even small splinters and shards could cause

severe injuries, when getting into your food or beverages. Thus, do not use glass

parts again, when there are any cracks or chipped edges. Do not pour cold water

into the hot kettle. Always leave the kettle cool down before filling it again. For

operation, always unwind the power cord completely to avoid hazard due to over-

heating, fire, and electric shock. Always unplug the appliance before cleaning it,

and when it is not in use. Do not place the kettle or power base in an automatic

dishwasher. Do not place or immerse the appliance (power base and kettle) or

power cord in water or other liquids or spill any liquids on the power base, power

cord, or the exterior of the kettle. For filling, always remove the kettle from the power

base. Do not use any abrasive or corrosive cleaners for cleaning to avoid damage

to the surfaces.

1. Unpack the appliance and all parts and accessories carefully. Check that no

parts are damaged or missing (see: ‘Knowing Your New Glass Tea Kettle’).

Carefully remove all packaging, shipping materials, stickers, and promotional

materials. However, DO NOT remove the model label.

2. Before first use and after a longer period of storage, clean all parts of the appli-

ance (see: ‘Care and Cleaning’). Rinse the interior of the kettle thoroughly with

clear tap water.

3. Select a suitable place for operating the appliance near a sufficient wall power

outlet, leaving a distance of at least 20 cm to the edge of the table or counter

and to any other object (see: ‘General Safety Instructions’). Completely unwind

the power cord and connect the power plug directly to the power outlet.

4. Fill the kettle with 1.5 litres of clear drinking water and bring the water to the

boil via the “Hot water” program (see: ‘Operation/Bringing Water to the Boil’).

Thereafter discard the water and wait until the kettle cooled down.

5. Repeat the previous step.

6. Then rinse the kettle with clear tap water. The appliance is now ready for use.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gastroback 42438 Seite 58

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info