Bedienungsanleitung Gazco F40 Avanti Conventional Coal (Seite 5 von 23) (Englisch)

813396

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

3. TURNING OFF THE STOVE

3.1 To turn the stove off, locate the control valve, turn the left-

hand control knob until it points to off ( ). The main burner

will go out leaving the pilot burning.

3.2 To turn the pilot off, locate the control valve, turn the right-

hand control knob until it points to off ( ), the pilot will go

out.

4. UPGRADING YOUR STOVE

4.1 Your stove is fitted with a control valve that can be easily

upgraded to battery powered remote control. This upgrade

can be fitted by anyone capable of simple DIY jobs and

requires no special training. There are two versions of this

control which can be obtained through your local Gazco

stockist.

4.2 STANDARD REMOTE CONTROL This remote control can

control the gas appliance after the pilot has been lit. It can

turn the main burner on and regulate it from low through to

high and back again. It can turn the main burner off leaving

the pilot burning. GAZCO PART NUMBER 8455.

4.3 THERMOSTATIC AND TIMER REMOTE CONTROL This

remote control can control the gas appliance after the pilot

has been lit. In ‘MANUAL MODE’ it can be used to turn the

main burner on and manually regulate it from low through

to high and back again. It can also be used to turn the main

burner off leaving the pilot burning. In ‘AUTO MODE’ it will

automatically regulate the room temperature. In ‘TIMER

MODE’ it will turn the fire on and off according to a pre-set

programme and automatically regulate the room

temperature during two ON periods. GAZCO PART

NUMBER 8456.

5. HANDLING & DISPOSAL OF FIRE

CERAMICS

The fuel effect and side panels in this appliance are made

from Refractory Ceramic Fibre (RCF), a material which is

commonly used for this application.

Protective clothing is not required when handling these

articles, but we recommend you follow normal hygiene rules

of not smoking, eating or drinking in the work area and

always wash your hands before eating or drinking.

To ensure that the release of RCF fibres are kept to a

minimum, during installation and servicing a HEPA filtered

vacuum is recommended to remove any dust accumulated

in and around the appliance before and after working on it.

When servicing the appliance it is recommended that the

replaced items are not broken up, but are sealed within

heavy duty polythene bags and labelled as RCF waste.

RCF waste is classed as stable, non-reactive hazardous waste

and may be disposed of at a licensed landfill site.

Excessive exposure to these materials may cause temporary

irritation to eyes, skin and respiratory tract; wash hands

thoroughly after handling the material.

2. REMOVING THE DOOR

2.1 To remove the door:

 •Openthedoortoa90°anglebypushingthebottomright

corner

AR1714

 •Liftthedooroffthetwohingepinsontheleft

 • Placecarefullytooneside

AR1453

2.2 Toremovetheglassframe:

 •Unscrewtheeightpozidrivescrews.Diagram7

AR1454

USER INSTRUCTIONS

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gazco F40 Avanti Conventional Coal Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info