Bedienungsanleitung Gazco Riva 2 F670 Balanced Flue (Seite 5 von 44) (Englisch)

813406

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

IMPORTANT: YELLOW FLAMES TYPICALLY

APPEAR WHEN THE APPLIANCE HAS REACHED

NORMAL OPERATING TEMPERATURE. THIS CAN

TAKE UP TO 30 MINUTES.

WARNING: IF THE APPLIANCE FAILS TO LIGHT OR

BECOMES EXTINGUISHED IN USE, WAIT 3

MINUTES BEFORE ATTEMPTING TO RELIGHT.

2.2 There are 3 different modes available for controlling and

operating the appliance:

1. Manual Mode

2. Temp Mode (Automatic)

3. Timer Mode (Automatic)

2.3 In MANUAL MODE you can:

— turn on the main burner using the UP button.

— regulate the flame from high to low and back.

— turn off the burner leaving just the pilot burning.

In TEMP MODE (Automatic) you can:

— set the room temperature so the thermostat in the remote

automatically maintains that temperature.

In TIMER MODE (Automatic) the appliance:

— turns on and off according to the set time periods.

— automatically regulates the room temperature during the

set periods.

NOTE: When operating the appliance in Temp or Timer

mode, the pilot remains lit and the appliance then

automatically switches on at programmed times to bring

the room to the set temperature whether or not you are

in the room.

NEVER LEAVE ANY COMBUSTIBLE MATERIALS

WITHIN 1 METRE OF THE FRONT OF THE APPLIANCE.

Switching Between Modes

2.4 Press the SET button to change to Temperature Mode.

Press again to change to Timer Mode.

Keep pressing to run through all operating modes. These

are:

— MAN

— DAY TEMP

— NIGHT TEMP

— TIMER

and back to MAN.

NOTE: MAN mode can also be reached by pressing

either the UP or DOWN button.

Manual Mode

2.5 Press the OFF button and the UP button simultaneously.

You hear several clicks and audible beeps as the appliance

begins the ignition process, (up to 30 seconds).

Turning the appliance Off:

Press the OFF button to turn the appliance off.

FOR SAFETY, YOU MUST WAIT 30 SECONDS BEFORE

LIGHTING THE APPLIANCE AGAIN.

Increasing the Flame Height:

Press the UP button once to increase flame height one stage.

Press and hold the UP button to increase to maximum.

Decreasing the Flame Height:

Press the DOWN button once to decrease flame height

one stage. Press and hold the DOWN button to decrease to

minimum. At the lowest point the appliance goes to 'Standby

Mode' (Only Pilot lit).

NOTE: While pressing a button a symbol indicating

transmission appears on the display. The receiver

confirms transmission with a sound signal.

Temp Mode (Automatic)

2.6 The display shows the current room temperature.

To increase or decrease the appliance’s output:

Press the SET button to select either the DAY TEMP

or the NIGHT TEMP mode by briefly pressing the

SET button.

Hold the SET button until the TEMP display flashes and

then let go.

Set the desired temperature with the UP and DOWN arrows.

(Minimum temperature 5C, maximum 40C or 40F to 99F

when Fahrenheit is the preferred option)

Press the OFF button to stop the display flashing or wait

to return to TEMP mode.

NOTE: If you set a temperature that is beneath the

current room temperature, the appliance automatically

switches to PILOT (Stand by).

If you would like the Night temperature control to turn

off then decrease the temperature until [--] is displayed.

Timer Mode (Automatic)

2.7 There are two programmable settings you can make over a

24 hour period, P1 and P2. These are normally used to

provide an early morning and evening setting for each

working week:

P1 + = Start Timed Setting 1

P1 + = End of Timed Setting 1

P2 + = Start Timed Setting 2

P2 + = End of Timed Setting 2

User Instructions

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gazco Riva 2 F670 Balanced Flue Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info