Bedienungsanleitung Gazco Sheraton 5 - Balanced Flue (Seite 4 von 52) (Englisch)

813479

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

GENERAL

Installation and servicing must only be carried out by a competent

person whose name appears on the GasSafe register. To ensure

the engineer is registered with GasSafe they should possess an ID

Card carrying the following logo:

In all correspondence, please quote the appliance type and serial

number which can be found on the data badge located at the rear

of the appliance or on the Commissioning Checklist on Page 3.

Do not place curtains above the appliance:

You must have 300mm clearance between the appliance and any

curtains at either side.

The manufacturer considers the full outer casing of this stove to

be a working surface and it will become hot whilst in operation. A

suitable guard is recommended to protect young children, the aged

and the inrm.

No furnishings or other objects should be placed within

1 metre of the front of the appliance.

If a shelf is fitted, a distance of 225mm above the appliance is

required.

Do not attempt to burn rubbish in this appliance.

This appliance must only be operated with the door secured rmly

in position. If any cracks appear in the glass the appliance must not

be used until the glass panel is replaced.

If, for any reason, the ue has to be removed from the appliance,

the seals must be replaced in the inner spigot.

Do not obstruct the ue terminal in any way i.e. by planting owers,

trees shrubs etc. in the near vicinity, or by leaning objects up

against the terminal guard.

Do not put any objects on the terminal guard; it will lose its shape.

Do not use a garden sprinkler or hose near the terminal.

This product is guaranteed for 5 years from the date of installation,

as set out in the terms and conditions of sale between Gazco and

your local Gazco retailer. Please consult with your local Gazco

retailer if you have any questions. In all correspondence always

quote the Model Number and Serial Number.

OPERATING THE APPLIANCE

There are two ways of lighting the appliance:

Using the Manual Controls on the Control Box

(located on the appliance).

By Thermostatic Remote Control.

MANUAL OPERATION (CONTROL BOX)

Power Switch

Power Button

Flame Adjustment (Up)

Flame Adjustment (Down)

To operate the appliance the Power Switch on the Control Box

must be switched ON ( l ).

Note: The Power Switch does not need to be turned

off each time the appliance is not in use.

However, if the appliance is left unattended for long

periods of time (e.g. vacation), it is recommended to

place the Power Switch into the off position.

TURNING THE APPLIANCE ON:

Press and hold the Power Button for 1 second and release.

The burner will light approximately 2 to 3 seconds later.

Use + and - buttons to adjust the flame height between Minimum

and Maximum.

TURNING THE APPLIANCE OFF

Press the power button to turn the appliance off.

IMPORTANT: YELLOW FLAMES TYPICALLY

APPEAR WHEN THE APPLIANCE HAS REACHED

NORMAL OPERATING TEMPERATURE. THIS CAN

TAKE UP TO 30 MINUTES.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gazco Sheraton 5 - Balanced Flue Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info