813479

Gazco Sheraton 5 - Balanced Flue Seite 6

6
Zoom out
Zoom in
Vorherige Seite
1/52
Nächste Seite
6
SETTING TIMER MODE (IN MANUAL OPERATION)
Timer Mode will turn the appliance off after a set period of time has
elapsed.
Timer Mode can be set before or during manual operation of the
fire.
Note: If Timer mode is activated and the fire is
manually turned off, the timer will be cancelled.
Changes to the Timer will reset to the default time
on next use.
If the fire is off when the Timer mode is set then the
timer will automatically start when the fire is turned
on.
Hold the handset to unlock and press and release the MODE
button. The word MAN and the Zzz symbols flash at the top of the
display.
Press and release the SET button.
This will activate the Timer mode.
The default time period is 1 hour, unless altered in Advanced
Settings.
Pressing the SET button again will show the remaining time.
This can be altered by pressing the + or - buttons.
The timer can be set between 1 minute and 24 hours.
After adjusting the time press SET again to confirm the time setting
desired.
Once the countdown has reached zero the fire will turn off.
THERMOSTATIC MODE
The handset contains a thermostatic sensor to control the operation
of the appliance according to the temperature of the room.
There are 3 temperature options that can be set:
Day Mode - indicated by a Sun symbol on the display (default
temperature 24ºC)
Night Mode - indicated by a Moon symbol on the display (default
temperature 18ºC)
Frost Protection - indicated by a Snowflake symbol on the display
(default temperature 5ºC)
PROGRAMMING THE MODES
Holding the handset to unlock, press and hold the SET button until
a beep is heard to indicate the command has been received.
Release the SET button. PROG and a flashing thermometer
symbol will be displayed at the top of the display.
Press and release the SET button to enter Day Mode.
The current temperature setting and mode will be displayed- for
example the Sun symbol on the left shows it is in Day Mode and
the default temperature is 24ºC.
To change the temperature press + or - whilst the set temperature
is displayed to alter the setting.
Press and release the SET button to confirm and to scroll to the
Night Mode.
To change the temperature press + or - whilst the set temperature
is displayed to alter the setting.
Press and release the SET button to confirm and to scroll to Frost
Protection mode.
To change the temperature press + or - whilst the set temperature
is displayed to alter the setting.
When finished press the SET button again and the new settings will
be accepted.
The display will return to the time of day screen.
CHOOSING A MODE
When choosing a mode during operation the temperature can
be temporarily changed, however these settings will reset to
the previously set programmed settings when the fire is turned
off.
Holding the handset to unlock, press and release the MODE button
several times until a thermometer symbol flashes at the top of the
display.
Press the SET button to enter the Thermostatic mode.
Press the Set button again to see the current temperature setting
and mode - for example the a Sun symbol on the left shows it is
Day Mode and the default temperature is 24°C.
With the temperature displayed, press + or - to alter the setting.
Press the MODE button repeatedly to scroll through the settings
and to select Night mode or Frost Protection.
The handset must be left in the chosen mode for it to operate.
When finished press SET again and the new setting will be
accepted.
The display will return to the time of day screen.
If at any time the power button is operated during Thermostatic
Mode the control will cancel any thermostat operation and return
the handset to Manual Mode.
SETTING TIMER MODE (IN THERMOSTATIC OPERATION)
Timer Mode will turn the appliance off after a set period of time has
elapsed.
Timer Mode can be set before or during thermostatic operation of
the fire.
Hold the handset to unlock, press and release the MODE button
until the word MAN and the Zzz symbols are flashing at the top of
the display.
Press and release the SET button.
This will activate the Timer mode.
The default time period is 1 hour, unless altered in Advanced
Settings.
Pressing the SET button again will show the remaining Time.
This can be altered by pressing the + or - buttons.
The timer can be set between 1 minute and 24 hours.
After adjusting the time press SET again to confirm the time setting
desired.
Once the countdown has reached zero the fire will turn off.
… 6 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Gazco Sheraton 5 - Balanced Flue wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info