Battery Backup –
To use the battery backup, you can install a 9-volt alkaline battery in the back of the clock located
under the battery cover (14). Battery not included. Note the LED display will not show during
power failure but the clock will still be running and keeping proper time until the power is restored.
NOTE: For the best results it is recommended that the battery be changed every 6-8 months. If the
clock is not used for a while, it is recommended to remove the battery to aviod leakage.
Shutting Off Alarm –
Alarm can be shut off temporarily for the day or shut off permantently.
1) When the alarm goes off, simply press the AL off button (10) the alarm will shut itself off
for the day and come back on the next day at the same time if the alarm setting has not
changed.
2) To shut off the alarm permanently, slide Function Switch (11 ) to of positon. Alarm will
not come on until Function Switch ( 11 ) is set to „VIB“ or „BUZZ“ or
„VIB/BUZZ“ position.
Snooze Operation–
SNOOZE button (8) – press after alarm has sounded. The alarm will be turned off for 9 minutes
for extra sleep. The alarm will come back again after 9 minutes. You may repeat many time up to
119 minutes .
Alarm –
Set the alarm time you wish and slide the Function Switch (11) switch to the desired position. Set
to VIB for bed shaker , and BUZZ for sound, or VIB/BUZZ for both.
Tone –
Adjust the tone by rotating the Tone wheel (2) until you have reach the desired level.
Volume –
To adjust the volume rotate the Volume wheel (12) until you have reach the desired level.
Bed Shaker / Vibrator – Figure B
1) Attach the bed shaker jack to the back of the clock at VIBRATOR input (13).
2) To turn vibrator slide function switch (11) to VIB or VIB / BUZZ position.
3) Place vibrator under mattress or pillow.
AC 9V Power Input –
Attach the AC power supply input to the back of clock labeled AC9V~ IN (1 ).
Important: do not confuse AC input with vibrator input.
Hour Format and Power Cycle ( 15) – inside battery Comparment (For EU only)
Please select the appropriate settings for use.
For USA please select 12/60Hz;
For Europe please select 24/50Hz;
For UK please select 12/50Hz.
Please note the incorrect selection of power cycle will result in incorrect time.
