Bedienungsanleitung Gemini 7024 (Seite 3 von 8) (Englisch)

479873

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

SPECIAL FUNCTIONSSPECIAL FUNCTIONS

ALARM AUTOMATIC ARMING.

To obtain this function, connect the YELLOW-GREEN wire to earth. The alarm will

automatically arm 30 sec, after the engine switching OFF and the door opening.

SELF-LEARNING OF AN ELECTRONIC KEY CODE (US MODELS)

Close the vehicle’s doors and disarm the alarm system. Turn the ignition key to ON and within

10 seconds put the electronic key to learn in the socket. The LED switches on for one second.

It is possible to learn a maximum number of 3 keys.

Note: if you put a learned key in the socket this will not annul the other memorised keys;

otherwise, if you put a new key in the socket the first memorised key will be annulled.

GARAGE POSITION (ONLY US MODELS).

With this function it is possible to leave the vehicle in the servicing or in the washing centres without

leaving the original transmitter or the electronic key to the staff. To obtain this function, connect the

yellow-green wire to earth.

ACTIVATION OF THE GARAGE POSITION.

1. Disarm the alarm, turn the ignition key to ON and open one door.

2. Turn the ignition key to ON and within 15 sec. put the electronic key in the socket. 2

pulses of the LED signal the activation of the function.

Note: put the key in the socket within the 15 seconds otherwise the procedure will

automatically annul.

3. Turn the ignition key to OFF position.

In this condition the engine of the vehicle can be switched on for 20 times without triggering

the alarm. The working of the GARAGE position is signalled through the fast flashing of the

LED if the ignition key is in ON position for more than 10 seconds.

BLINKER EXCLUSION WHILE ALARM ARMING/DISARMING

This function is necessary on vehicles with original flashing of the direction indicator lights

while opening and closing the door.

BLINKER EXCLUSION ACTIVATION.

Before supplying the alarm unit, turn the ignition key to ON position.

Supply the alarm system and turn the ignition key to OFF.

LED’S MEMORY

While alarm disarmed it is possible to verify if an alarm condition has occurred and to

determine the cause following the LED flashing.

LED signalling Alarm triggering

¬l¬ Internal sensors (only 7024US)

¬¬l¬¬ Doors pin switches

¬¬¬l¬¬¬ Ignition live

¬¬¬¬l¬¬¬¬ External sensors(Green-Black wire)

l LED OFF (2 sec.) ¬ LED ON (1 sec.)

The inhibit time is 30 sec. for each alarm triggering. Turn the ignition key to ON to stop the

LED flashing.

TECHNICAL DATA

Power supply 10,5 ÷14,5VDC

Max. current absorption 5 mA

Working temperature -30° + 85°

Contact capacity horn control 8A to 20° C

Contact capacity visualising signals 8A to 20° C

Contact capacity engine immobilisation 8A to 20° C

Alarm period 30 sec.

Max. current –positive alarm armed (+A) 1A

Max. current comfort control 100mA

Max. number codifying keys 3 (only US models)

SELF-POWERED CODIFIED 7125TNC SIREN (US models)

DESCRIPTION

The self-powered codified siren is an audible signalling device with high power designed to be installed in

the engine compartment of the vehicles, which can be connected to the alarm unit through the wiring

harness supplied with the kit.

Wiring connections (for the installer) :

disconnect the negative of the battery and only re-connect after the installation is complete.

Wires Function

BLACK initialled RB ê Battery positive

BLACK initialled MB

ê Battery negative

BLACK initialled S

ê Gemini alarm PINK wire

BLACK initialled L

ê Gemini alarm BLUE wire

Connect one end of the BLACK initialled V wire to the bonnet button and the other end to the alarm unit

GREEN wire.

WORKING

The electronic siren 7125TNC is supplied with a self-powering internal device that allows the working of the

siren also in absence of the power or if the connection wires to the unit are cut.

Through the codified system between alarm and siren, the alarm activates and de-activates both the

battery charging and the power of the siren.

The battery recharges only with alarm disarmed. The self-power activates only with alarm armed and 3

minutes after the alarm disarming. Before de-activating the siren it is necessary to wait 4 minutes after the

alarm disarming.

MOUNTING

Mount the siren in the engine compartment of the vehicle using the screws and the bracket supplied with

the kit and a 8 mm adjustable wrench to tighten the nuts.

Mount the siren away from areas of intense heat and turn the acoustic ear trumpet to low.

Protects the wires from water and humidity isolating connection points with protective sheaths.

Technical data

Power supply 12 V

Current absorption alarm ON 3 mA

Current absorption alarm OFF 7 mA

Audible tone > 120 dB

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gemini 7024 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info