Bedienungsanleitung Gemini 7201 (Seite 3 von 9) (Englisch)

479852

Zoom out

Zoom in

Vorherige Seite

1/9

Nächste Seite

SPECIAL FUNCTIONS

Panic

Is obtained pressing the transmitter 2 button with the alarm armed or disarmed after the neutral

time of 45 seconds. The siren activates for 29 seconds. To de-activate the siren within the 29

seconds, press again on the transmitter 2 button.

SIREN EXCLUSION

While alarm disarmed, turn the ignition key of the vehicle to ON. Press on the transmitter 2 button

for at least 3 seconds, the LED lights fix till the releasing of the transmitter’s button to signal the

siren sound exclusion.

Turn again the ignition key to OFF and arm the alarm system. The disarming of the system sets to

zero the function.

SELF-LEARNING OF THE CODE OF A NEW TRANSMITTER.

1. Disarm the alarm with the transmitter.

2. Set the dip-switch N.6 to ON.

3. Turn the vehicle i gnition key to ON for at least 1 second and then to OFF. The LED lights fix till

the ignition key is turned to OFF.

4. Turn the key to OFF and within 30 seconds press one of the transmitter’s buttons to learn. The

LED lights for 0,5 seconds to signal the code memorisation.

NOTE: If the operation is not carried out within 30 seconds it will be necessary to repeat the

operation from point 3.

It is possible to learn a maximum number of 4 transmitters; for each transmitter’s coding repeat the

operation from point 3.

ATTENTION! AT THE END OF THE PROCEDURE SET THE DIP-SWITCH N.6 TO OFF.

ULTRASONIC SENSOR EXCLUSION AND WINDOWS CLOSURE.

During the first 25 seconds of neutral time, it is possible to de-activate the ultrasonic sensors and to

stop the window closure pressing on the transmitter 2 button. One-direction indicator lights

flashing signals the operation.

If the time set is 1,5 or 6 seconds, the exclusion of the ultrasonic inlet disables the positive outlet on

the alarm Pink wire (+A); to obtain the disabling of the closure relay set the comfort time of 25

seconds.

To exclude the ultrasonic inlet with the windows completely closed; it is necessary to wait the

complete closure of the window and to press on the transmitter 2 button.

ACOUSTIC SIGNAL LING EXCLUSION (CHIRP)

1. While alarm disarmed, turn the ignition key of the vehicle to ON.

2. Press on the transmitter 1 button for at least 3 seconds. The LED flashes for 0,5 seconds to

signal the audible tone exclusion.

3. Position again the vehicle ignition key to OFF.

CHIRP FUNCTION ACTIVATION.

1. While alarm disarmed turn the vehicle ignition key to ON.

2. Press on the transmitter 1 button for at least 3 seconds. The LED flashes for 0,5 second; the

activation of the Chirp function is signalled by one audible tone.

LED’S MEMORY

While alarm disarmed it is possible to verify if an alarm condition has occurred and to determine

the cause following the LED flashing.

LED SIGNALLING ALARM TRIGGERING

Y l Y Ultrasonic sensors inlet

Y Y l Y Y Ignition live (engine immobilisation)

Y Y Y l Y Y Y Door, boot and bonnet pin switch and

absorption sensor.

l LED OFF (2,5 seconds) Y LED ON ( 400mS)

NOTE: to stop the LED flashing it is necessary to turn the ignition key to ON.

ACTIVE FUNCTIONS WHILE ALARM ARMED

IMMEDIATE AFTER 45 SECONDS

- Ignition live: activates while arming the

system; the detection is obtained after the

neutral time of 45 seconds.

- cut wires (art.7203)

- current absorption;

- door, boot and bonnet opening;

- sensors inlet.

NOTE: the neutral time is signalled through the LED lightning fix.

Transmitters battery discharging

The discharging of the battery is signalled through the

LED of the transmitter. If the LED flashes while

pressing one of the transmitter’s buttons it is

necessary to replace the batteries.

Batteries model : CR1616

Note:

put the batteries in the appropriate container.

TECHNICAL DATA

Power supply 12VDC

Current absorption alarm ON with US module 16mA

Current absorption alarm OFF 9 mA

Working temperature -30°+ 85°C

Engine immobilisation relay contact capacity 8A a 20°C

Blinker and central door locking relay contact capacity 10A a 20°C

Power sound at 1 meter in open space > 118dB

Minimum sensitivity absorption sensor 5W

Current for positive control alarm armed 500 mA

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gemini 7201 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info