Bedienungsanleitung General Electric GTD86 (Seite 15 von 36) (Englisch, Spanisch)

646564

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Problem Possible Causes What To Do

Clothes take too long Improper sorting • Separate heavy items from lightweight items (generally,

to dry a well-sorted washer load is a well-sorted dryer load).

Large loads of heavy fabrics • Large, heavy fabrics contain more moisture and take

(like beach towels) longer to dry. Separate large, heavy fabrics into smaller

loads to speed drying time.

Controls improperly set • Match control settings to the load you are drying.

eDry option is on • For optimal drying times, turn eDry off.

• For optimal energy savings, turn eDry on.

Lint filter is full • Clean lint filter before every load.

Improper or obstructed • Check installation instructions for proper ducting/venting.

ducting • Make sure ducting is clean, free of kinks and unobstructed.

• Check to see if outside wall damper operates easily.

• Check the Installation Instructions to make sure the

dryer venting is correct.

Blown fuses or tripped • Replace fuses or reset circuit breakers. Electric dryers

circuit breaker use 2 fuses/breakers, make sure both are operating.

Overloading/combining loads • Do not put more than one washer load in the dryer at

a time.

Under-loading • If you are drying only one or two items, add a few items

to ensure proper tumbling.

Clothes are wrinkled Over-drying • Select a shorter drying time.

• Remove items while they still hold a slight amount of

moisture. Select a Less Dry or Damp Dry setting.

Letting items sit in dryer • Remove items when cycle ends and fold or hang

after cycle ends immediately.

Overloading • Separate large loads into smaller ones.

Clothes shrink Some fabrics will naturally shrink • To avoid shrinkage, follow garment care labels exactly.

when washed. Others can be

safely washed, but will shrink

• Some items may be pressed back into shape after drying.

in the dryer

• If you are concerned about shrinkage in a particular

item, do not machine wash or tumble dry it

Water seen on inside of Steam condenses on these • This is normal.

door and top of lint filter surfaces

when opening door after

steam cycle

Small areas on clothes are Steam condenses on inner drum • If using the Steam Dewrinkle cycle, manually reduce

damp after steam cycle the cycle time or select fewer number of garments with

Steam Select. If using the Steam Refresh cycle, add

more garments to the load.

Collars and waistbands The dryness monitor senses • Choose Speed Dry or Timed Dry to dry damp collars

still wet at end of cycle that the body of the clothes and waistbands. In the future, when drying a load with

is dry collars and waistbands, choose More Dry.

Slight variation This is normal • Due to the metallic properties of paint used for this unique

in metallic color product, slight variations of color may occur due to viewing

angles and lighting conditions.

GEAppliances.com

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

General Electric GTD86 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info