Bedienungsanleitung General Mobile DST-350 (Seite 6 von 32) (Englisch)

619319

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

After the battery is charged full, the icon is full of bars. Slight heat during charging is normal.

Warning: When a travel charger and its accessories are used to charge the battery, please firstly

check if they are original or recognized by the original manufacturer. The use of other accessories

may damage your mobile phone and cause risks! Always use them indoor and in dry places.

Notices on using the battery

The performance of the battery is affected by many factors, including radio barrier network

settings, signal strength, work temperature, chosen and used functions or settings as well as phone

accessories, tone, data or other applications.

For optimal performances, please follow the rules below:

 New battery or the battery having been idle for long need charging for long. The standard

voltage scope for the battery is 3.6V-4.2V.

 During charging, keep the battery at room temperature or similar temperature.

 With time passing by, the battery will gradually be worn and thus need longer time to charge.

This is normal. However, after normal charging, if call duration decreases but charging time

increases, you need to buy another battery from the original manufacturer or authorized by

the original manufacturer. The battery of interior quality can damage your mobile phone and

cause danger!

 If the phone is overused at low battery when charging, there might need a longer time for the

charge indicator to be shown on the screen.

Note: Please dispose the battery according to the local regulations. Try to recycle the battery as

possible. Do not treat the waste battery as common waste.

Warning: Do not throw the battery into fire so as to prevent fire. The broken battery may cause

explosion.

Warning

Charging the mobile phone by improper means can cause to

explosion. Always refer to the related regulations for the disposal of

the battery.

PIN Code

PIN1 Code:It is the personal identification number used to enter SIM1 and able to prevent

others using SIM1 without permission. If the mobile phone has activated the PIN1 code protection,

when the mobile phone is switched on, the screen will display “Input SIM1 PIN”. In the process of

inputting PIN1 code, the screen will use “*” to represent the input content. While obtaining SIM1,

you can obtain its PIN1 code.

PIN2 Code: It is the personal identification number used to enter SIM2 and able to prevent

others using SIM2 without permission. If the mobile phone has activated the PIN2 code protection,

when the mobile phone is switched on, the screen will display “Input SIM2 PIN”. In the process of

inputting PIN2 code, the screen will use “*” to represent the input content. While obtaining SIM2,

you can obtain its PIN2 code.

PUK Code and PUK2 Code(8-digit)

To change the locked PIN1 code, you need to use PUK1 (Personal Unblocking Key) code. To

change the locked PIN2 code, you need to use PUK2 code. If these two codes are not provided

together with the SIM cards, ask the local service provider for them.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

General Mobile DST-350 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info