Information about user parameters allows the watch to calculate different values as accurately as possible:
- Gender: needed to calculate calories and fat burned.
- Date of birth: needed to calculate theoretical maximum heart rate.
- Weight: needed to calculate calories and fat burned.
- Height: needed to calculate calories and fat burned.
- FC max (maximum HR) on ONmove 710 only.
It is automatically calculated using the formula 220 – age. If you know this already, you can calculate the optimal number of calories and fat burned and
calculate target zones expressed as a percentage of maximum HR more accurately.
This can be measured with the heart rate monitor during a sustained effort over a relatively short distance. After a proper warm-up, run one lap on a running
track at slow pace followed by a second lap at medium speed and then a faster third lap accelerating as much as you can over the last 100 metres. The heart
rate recorded is the one shown as you cross the nish line. Please consult your doctor before undertaking such exercise.
- HR min (resting HR) on ONmove 710 only
This provides a more accurate calculation of calories and fat burned. It can also be measured using the HR monitor. The ideal time to measure is in the
morning, when you are totally relaxed, lying on your bed.
16�5� HR belt (ONmove 710 only)
This menu will let you activate or deactivate your HR belt.
16�5�1� Pairing with cardio belt monitor
If the cardio belt monitor function is activated, you can continue with pairing process.
The watch is automatically programmed to pair with the HR belt monitor contained in the package. It is, therefore, unnecessary to use the “pairing”
function in order to use it.
The “pairing” function should only be used if the belt is replaced.
Each sensor (accelerometer or heart rate monitor belt) has a unique identication number that cannot be changed. When the belt is
activated, it automatically transmits its identication number to the watch. The HR monitor belt is activated as soon as it is moistened and
tted to the chest.
Once the belt is in place, press the OK key once to scroll through watch’s recommendations and launch the search.
During the pairing process, you must stand at least 10 metres away from other HR monitor belt users to prevent the watch from connecting
to other belts.
This precaution is only necessary for the pairing process and does not need to be repeated when searching for the belt at the beginning
of the free session, training or challenge modes.
The watch should locate the belt in a few seconds.
Press the OK key once the belt is found.
If the watch does not successfully pair with the belt, press the OK key; you will be asked to restart the process.
In the event of the pairing procedure repeatedly failing, please refer to chapter 19.2. Detecting HR belt.
16�5�2� Deactivate HR monitor function
If the HR monitor belt function is activated, you can deactivate it.
If you no longer wish to use your HR belt monitor, you are advised to deactivate the HR monitor function so as to prevent the watch from searching for the
belt at the start of every session. You will save time and battery charge (this searching phase consumes a lot of charge)
By deactivating the HR function, the watch will delete information and parameters linked to heart rate from the different watch menus.
Press the OK key once the function is deactivated.
16�5�3� Activate the HR monitor
If you deactivate the HR monitor function you can activate it again later.
If you do this, the watch will restart the pairing process (see chapter 16.5.1. Pairing the HR monitor belt)
16�6� Upgrade/maintenance
You can view the rmware version of your watch in the updates/maintenance menu. Firmware is your watch's internal programme. It
undergoes ongoing improvements to make your product ever easier and more fun to use.
When connecting your product to your computer, ONconnect checks the rmware version and lets you know if a new version is available. In this case, we
advise you to update.
16�6�1� Upgrading product
When an update is available, an information sticker is displayed on the "Adjustments" category.
Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.
Art des Missbrauchs:
Forenregeln
Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:
Lesen Sie zuerst die Anleitung;
Schauen Sie nach, ob die Frage bereits gestellt wurde;
Stellen Sie die Frage so deutlich wie nur einigermaßen möglich;
Erwähnen Sie was Sie bereits versucht haben um das Problem zu lösen;
Ist Ihr Problem von einem Besucher gelöst dann lassen Sie ihn / sie wissen in diesem Forum;
Falls Sie reagieren möchten, so verwenden Sie bitte das Antworten- Formular;
Da ihre Frage für alle Besucher sichtbar ist, sollten Sie lieber keine persönliche Daten erwähnen.
Neu registrieren
Registrieren auf E - Mails für Geonaute ONmove 510 wenn:
neue Frage gestellt werden
neue Handbücher vorhanden sind
Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.
Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.
Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.
Ihre Frage wurde zu diesem Forum hinzugefügt
Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.
