Bedienungsanleitung Geonav 6 SUNSHINE (Seite 14 von 29) (Englisch)

522267

Zoom out

Zoom in

Vorherige Seite

1/29

Nächste Seite

offered by Busse-Yachtshop.com

EnglishEnglish

Functional Characteristics

To cancel local time, press PAGE until the menu bar is dis-

played, select SETUP, SET TIME and then GMT.

Chart presentation

This function allows the user to select the symbols and colors

of chart presentation between International mode and US mode.

To change the chart presentation mode, press PAGE to display

the menu, select SETUP, PRESENTATION and then choose

the option desired.

Display mode

The chart color can be selected among three predefined modes:

BRIGHT (bright light), DAY (normal light) and NIGHT (poor

light).

Press PAGE to display the menu, select SETUP, MODE and

then choose the option desired.

Depth contours

This function allows the user to select the display of depth

contours; the options available are:

OFF: no depth contour displayed

5m: display of contours only with depths up to 5 meters

10m: display of contours only with depths up to 10 meters

20m: display of contours only with depths up to 20 meters

ALL: all depth contours are displayed

Safety contours

This function allows the user to display the depth areas cor-

responding to the safety contour desired. The options avail-

able are:

OFF: no depth area displayed

2m: areas with depths up to 2 meters in dark blue

5m: areas with depths up to 2 meters in dark blue, up to 5

meters in blue

10m: areas with depths up to 5 meters in dark blue, up to

10 meters in blue

replacing RANGE with OVZ (blinking) within the navigation

window.

To activate/deactivate the Overzoom function, press PAGE un-

til the menu bar is displayed, then select SETUP, OVERZOOM

and ON/OFF.

Position calibration

Most position sensors have intrinsic errors that make the boat’s

position incorrect (from few meters to several hundred meters)

with respect to the background display of the chart.

This error is caused by the principle at the root of the satel-

lite-derived position system.

The position calibration allows the user to manually correct

the position error present in all GPS. Press PAGE until the

menu bar is displayed, select SETUP, CALIBRATION and then

ON.

A message will prompt the user to move the cursor to the boat’s

true position by using the CURSOR key. Press ENTER to move

the GPS boat’s position to the point indicated by the cursor.

This operation will save the calibration for use in future cal-

culations.

NOTE: When the calibration is activated, the coordinates will be marked by (*).

To cancel calibration, press PAGE until the menu bar is dis-

played, select SETUP, CALIBRATION and then OFF.

Local time

By this function the user can enter local time instead of the

Greenwich time (GMT) supplied by the GPS receiver.

To enter local time, press PAGE until the menu bar is dis-

played, select SETUP, SET TIME and then LOCAL.

A window will allow entering local time by using the CURSOR

key. Press ENTER to confirm the operation.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Geonav 6 SUNSHINE Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info