Bedienungsanleitung Gigabyte GSmart T600 (Seite 10 von 57) (Englisch)

568223

Zoom out

Zoom in

Vorherige Seite

1/57

Nächste Seite

1-4

t600

screen shows the battery status. You may

also check the battery status in Start >

Settings > System Tab > Battery Tab

1.5 Using Stylus

Use the stylus to touch or write on your screen.

Using stylus can avoid damaging your screen.

There are 2 ways to use your stylus:

1. Tap: softly tap on a desired item by your

stylus, and lift the pen from the screen.

2. Press: touch and hold your stylus on a

desired item for a few seconds until a blue

dotted circle appears. This indicates that a

pop up Menu is going to be activated.

1.6 Screen Alignment and

Settings

When using the device for the first time, screen

alignment is required. If you find that the

device does not accurately respond to your

stylus taps, or you have performed a system

reset, you need to align your screen.

1. Tap Start > Settings > System Tab > Screen

> General Tab.

2. Tap “Align Screen” on your screen.

3. On the align screen, use your stylus to

touch the crosses on the screen accurately.

4. Tap “OK” to exit.

You can also choose your screen display in

Portrait or Landscape.

1. Press and hold OK any time when the

device is on to switch your screen display

between Portrait and Landscape.

You can also change the default screen display

by following the steps below:

1. Tap Start > Settings > System Tab > Screen

> General Tab

2. On General Tab screen, select your desired

orientation. Portrait, Landscape

Right-Handed, Landscape Left-Handed.

3. Tap “OK”, the screen will change

accordingly.

1.7 Time and Date Settings

When using the device for the first time, you

are required to set your time zone, time, and

date. You can also tap on the clock icon on

Today’s screen to setup time and date.

1. Tap Start > Settings > System Tab > Clock

& Alarms > Time Tab

2. Select “Home” or “Visiting”.

3. Select your time zone.

4. Select AM / PM.

5. Use the up and down arrow aside hour,

minute and second to adjust the highlighted

time unit.

6. Tap the down arrow aside the date to open

a calendar, and select a desired month,

date, and year.

7. Tap “OK”, a pop-up window will appear on

your screen to confirm to “Save Changes to

the clock settings”.

8. Tap “Yes” to save the changes, and exit.

1.8 Power On/Off, Sleep Mode

Press Power On/Off key on the top of the

device to turn on the device.

Sleep Mode

1. Sleep Mode is a power saving mode

designed to reserve battery power. After

idling for a period of time, the device

automatically enters Sleep Mode. You may

also manually enter Sleep mode by

pressing power On/Off key shortly. The

backlight of the screen will turn off and the

device will go into Sleep mode. When in

Sleep mode, your device will show no

response to any operation or touches on

the screen and keypad.

2. Press the power On/Off key again to exit

Sleep mode.

3. You may set the time to activate Sleep

mode. The device will automatically enter

Sleep mode when no operation is done

within that time.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gigabyte GSmart T600 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info