Bedienungsanleitung Gigabyte GSmart T600 (Seite 11 von 57) (Englisch)

568223

Zoom out

Zoom in

Vorherige Seite

1/57

Nächste Seite

1-5

t600

• Tap Start > Settings > System

Tab > Power > Advanced Tab.

• Check “Turn off device if not

used for” Please select “On

battery power” or “On

external power”.

• Select your desired time

period.

• Tap “OK” to complete this

setting.

Power Mode

To turn off the device, press and hold Power

On/Off Key on the top of the device for about 5

seconds while the power is on.

1.9 My Information Setup

You can input your personal information to the

device in Owner Information.

1. Tap Start > Settings > Personal Tab >

Owner Information > Identification Tab.

2. Tap on “Name” field and input your name.

3. Tap on a desired input field and input your

information.

4. Tap on the Notes tap to input other

information you would like to display on

your device.

5. If you want your information to be displayed

on the starting screen, tap on the Options

tab, and check both “Identification

Information” and “Notes”.

6. Select “OK” to finish setup and save it.

1.10 Password Setup

You can set your own password to prevent

unauthorized use of your device.

1. Tap Start > Settings > Personal Tab > Lock

> Password Tab.

2. On Password tab screen, check “Prompt if

device unused for”.

3. Select an appropriate time.

4. Select a password type in “Password Type”

field.

5. Input your password in the “Password” field

and reconfirm the password in “Confirm”.

6. Tap “OK”, a pop-up window will appear to

confirm “Do you want to save password

settings changes?”

7. Tap “Yes” to finish settings and save the

changes; “No” to cancel.

8. You may also input password hint message

under the Hint tab screen.

9. Tap “OK” to save your inputs.

1.11 Device Lock

On “Today” screen, tap “Device unlocked” to

lock your device. When the device is locked,

the device will not respond to touches on

screen nor will it react to any input on the

keypad. You can enable device lock after

entering Sleep mode by pressing the power

key. To enable this setting, please follow the

steps below:

1. Tap Start > Settings > System Tab > Power

> Extended Tab

2. Check “Lock device when device enter

stand-by”.

Unlock device:

1. Tap “Unlock” on the bottom left of the

screen, or press the left function key.

2. Tap the “Unlock” button on the newly

appeared screen and the device is

unlocked.

1.12 System Reboot and Reset

Reboot System:

When you reboot the device, all running

programs will stop and you will lose all

unsaved information. Please make sure that all

information has been saved before performing

system reboot.

1. Reboot button is located on the bottom right

side of your device.

2. Use the stylus to softly poke the reboot

Note: If you forget your password, you

need to perform system default, which will

lose all

our data and settin

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gigabyte GSmart T600 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info