Bedienungsanleitung Gigaset DX800A PRO all in one (Seite 46 von 177) (Englisch)

617246

Zoom out

Zoom in

Vorherige Seite

1/177

Nächste Seite

Making calls

Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / telephony.fm / 06.09.11

Version 4, 16.09.2005

Selecting a connection at each call

Requirement: "Select at each call" has been

assigned to the base instead of a send con-

nection (

¢ page 120).

~c Enter the number and pick up

the receiver. The list of all the

base's connections is displayed.

q Select a connection.

§Dial§ / w Press the display key or the mid-

dle of the control key.

If a dialling plan has been defined for the

dialled phone number (see Web configura-

tor), then the send connection specified in

the dialling plan is used.

Using an alternative connection/

connection list on the display/function

key

Prerequisite: You have assigned an "alterna-

tive connection" or the list with all config-

ured connections to a display key or func-

tion key (

¢ page 109).

§Sel. Line§ Press the display or function

key.

q Select a line.

c /

§Dial§ Pick up the receiver or press the

display key.

Press

§Dial§ to activate handsfree

mode on the base (open listen-

ing;

¢ page 50).

~ Enter a number. The number is

dialled approximately

3.5 seconds after the last digit is

entered.

Any dialling plan that has been defined for

the dialled phone number (see Web config-

urator) is ignored. The selected send con-

nection is always used.

Calling an IP address

(provider-dependent)

You can also dial an IP address instead of a

phone number using VoIP.

¤ Press the star key * to separate the sec-

tions of the IP address

(e.g., 149*246*122*28).

¤ If necessary, press the hash #key to

attach the SIP port number of the person

you are calling to the IP address (e.g.,

149*246*122*28#5060).

If your VoIP provider does not support the

choice of IP addresses, each part of the

address will be interpreted as a normal

phone number.

Dialling emergency numbers

Dialling plans for emergency numbers

(e.g., the local police emergency number)

are preset on the base for certain countries.

Emergency calls are then always made via

the fixed line.

However, you can change the connection

through which each emergency number

should be called (e.g., if the phone is not

connected to the fixed line). You must make

sure, however, that the VoIP provider for the

selected connection supports emergency

numbers. If the VoIP connection is deleted

from the configuration, the emergency call

can no longer be made.

Please note

u You can use the red end key T to

cancel the dialling operation.

u You are shown the duration of the call

while the call is in progress.

u Dialling with the directory (page 62)

or call and redial list (page 58) saves

you from repeatedly keying in phone

numbers.

u If you have handsets registered to the

base, you can make internal calls free

of charge (page 98).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gigaset DX800A PRO all in one Seite 46

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Gigaset DX800A PRO all in one

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info