Bedienungsanleitung Gigaset DX800A PRO all in one (Seite 48 von 177) (Englisch)

617246

Zoom out

Zoom in

Vorherige Seite

1/177

Nächste Seite

Making calls

Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / telephony.fm / 06.09.11

Version 4, 16.09.2005

Displaying the phone number you

are calling (COLP)

Prerequisites:

u Your network provider supports COLP

(Connected Line Identification Presenta-

tion). You may need to activate COLP with

the provider (ask your provider about

this).

u The called party has not activated COLR

(Connected Line Identification Restric-

tion).

For outgoing calls, the phone number of the

connection on which the call is received is

displayed on the base.

The displayed number may differ from the

number you have dialled. Examples:

u The called party has activated call divert.

u The call is answered by another connec-

tion within a PABX system.

If there is an entry in the directory for this

phone number, the corresponding name

will be displayed.

Ending a call

& Replace the receiver or press the

red end key T.

Or if you are making the call with a headset:

¤ Press the Headset function key or red

end key Ton the base.

Accepting a call

An incoming call is signalled in three ways:

by ringing, by a display on the screen and by

the flashing handsfree key d.

Accept the call by:

¤ Picking up the receiver.

¤ Pressing the handsfree key d.

¤ Pressing the display key Ô to divert

the call to the answering machine.

¤ If the receive connection is assigned to an

answering machine and that answering

machine is not busy with another call:

– For calls to one of your VoIP connec-

tions:

For calls to your fixed line connection:

Press the display key Ô to divert

the call to the answering machine.

To deactivate the ringer, press the

§Silence§

display key. You can accept the call as long as

it is displayed on the screen.

To cancel an incoming call, replace the

receiver, press the red end key T or , for

VoIP Calls, press the display key

§Reject§.

Please note

u The actual number of the connection

you have reached (or the assigned

name) is displayed instead of the

called number during call swapping,

conference calls and consultation

calls.

u When the phone number is copied to

the directory and the redial list, the

dialled number (not the displayed

number) is copied.

Please note

Only calls to the receive connections

assigned to the base are signalled

(

¢ page 121).

The following applies in particular if VoIP

connections are configured on your

base:

u If you have not assigned the receive

connections on your base, all incom-

ing calls are signalled on the base and

all handsets.

u If you have assigned connections but

not assigned any connection to the

base, a handset or the answering

machine as the receive connection,

calls on this connection will not be

signalled.

If the number is only assigned to an

answering machine, calls will not be

signalled. If the answering machine is

switched on, it will accept the call.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gigaset DX800A PRO all in one Seite 48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Gigaset DX800A PRO all in one

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info