795395
67
Zoom out
Zoom in
Vorherige Seite
1/142
Nächste Seite
Gigaset N870 IP PRO / Admin IE-UK-International en / A31008-XXXXX-XXXX-X-XX / settings_provider.fm / 8/10/21
Template Module, Version 2.1, 11.08.2020 / Template Basiseinstellungen: Version 3.1 - 07.07.2020
Provider and PBX profiles
67
If the further outbound proxy configuration is identical to the proxy and registrar configuration
it is useless and will be ignored.
Outbound server address
This is the address, where the device should send all SIP requests to and where (in case of
successful registration) it expects to receive requests from.
Enter the (fully qualified) DNS name or the IP address of your provider's outbound proxy.
Example: 10.100.0.45 or sip.domain.net or sipproxy01.domain.net
If the Outbound server address field is empty, the system behaves independently of the
selected mode, as with Outbound proxy mode = Never.
Outbound proxy port
This is the port number of the outbound proxy server, where the device should send all SIP
requests to (and where it in case of successful registration expects to receive requests from).
Enter the communication port used by the outbound proxy.
Range: 1-65535; Default: 5060 (for UDP/TCP), 5061 (for TLS)
Outbound proxy port is empty and Outbound server address is a name:
The RFC3263 rules will be used to locate SIP servers and select them for load balancing and
redundancy.
Outbound proxy port is a fixed number:
The usage of DNS SRV records according to RFC3263 is blocked.
SIP SUBSCRIBE for Net-AM MWI
If activated a subscription is established for the purpose of receiving notifications about new
messages on the network mailbox.
Enable/disable SIP subscription via the radio boxes next to SIP SUBSCRIBE for Net-AM MWI.
DTMF over VoIP Connections
DTMF signalling (Dual Tone Multi Frequency) is required, for example, for querying and
controlling certain network mailboxes via digit codes, for controlling of automatic directory
enquiries or for remote operation of the local answering machine.
To send DTMF signals via VoIP, you must define how key codes should be converted into and sent
as DTMF signals: as audible information via the speech channel or as a "SIP Info" message.
Ask your VoIP provider which type of DTMF transmission it supports.
The DHCP option 120 ”sip server” sent by a SIP phone would internally overrule the
outbound proxy address and port setting. Outbound proxy mode is still and exclu-
sively in the hands of the local device administrator. By setting Outbound proxy
mode to Never, you can prevent any usage of DHCP option 120 by the DECT VoIP
phone. To allow for DHCP option 120, you should set Outbound proxy mode to
Always.
67

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Gigaset Pro N870E IP PRO wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Gigaset Pro N870E IP PRO

Gigaset Pro N870E IP PRO Bedienungsanleitung - Deutsch - 151 seiten

Gigaset Pro N870E IP PRO Bedienungsanleitung - Holländisch - 150 seiten

Gigaset Pro N870E IP PRO Bedienungsanleitung - Französisch - 151 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info