795395
69
Zoom out
Zoom in
Vorherige Seite
1/142
Nächste Seite
Gigaset N870 IP PRO / Admin IE-UK-International en / A31008-XXXXX-XXXX-X-XX / settings_provider.fm / 8/10/21
Template Module, Version 2.1, 11.08.2020 / Template Basiseinstellungen: Version 3.1 - 07.07.2020
Provider and PBX profiles
69
Active codecs / Available codecs
The following voice codecs are supported:
Activate/deactivate a codec:
Select the required codec from the Available codecs/Active codecs list and click on / .
Define the sequence in which the codecs should be used:
In the Active codecs list select the required codec and click on / to move it up/down.
Number of parallel calls per base station depending on bandwidth
RTP Packetisation Time (ptime)
Length of time in milliseconds represented by the audio data in one packet.
Select the size of RTP packets to send. Select between 10 / 20 / 30 ms.
Signalling options for 'Hold' in Session Description Protocol (SDP)
Call hold means that a user requests to put an active call on hold. The holding part sends a
re-INVITE request to the held client with an SDP offer (Session Description Protocol). This SDP
offer contains the attribute line a=inactive or a=sendonly.
Select which attribute should be sent in the SDP offer:
G.722 Outstanding voice quality. The G.722 wideband voice codec works at the same bit rate
as PCMA/PCMU (64 kbit/s per voice connection) but at a higher sampling rate (16 kHz).
To enable wideband connections via G.722 you have to activate the codec explicitly on
the TelephonyVoIP page ( p. 81)
PCMA/
PCMU
(Pulse Code Modulation) Excellent voice quality (comparable with ISDN). The required
bandwidth is 64 kbit/s per voice connection.
PCMA (G.711 a law): Used in Europe and most countries outside of USA.
PCMU (G.711 μ law): Used in USA.
G.729A Average voice quality. The necessary bandwidth is less than or equal to 8 kbit/s per
voice connection.
Selection of codecs G.722 and G.729 influence the system capacity in direction to
lower amount of parallel calls per base station.
Codecs enabled Number of calls
G711 only 10
G729 and G711 8
G722 and G729 and G711 5
inactive The SIP endpoint would neither send nor receive data.
sendonly The SIP endpoint would only send and not receive data.
69

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Gigaset Pro N870E IP PRO wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Gigaset Pro N870E IP PRO

Gigaset Pro N870E IP PRO Bedienungsanleitung - Deutsch - 151 seiten

Gigaset Pro N870E IP PRO Bedienungsanleitung - Holländisch - 150 seiten

Gigaset Pro N870E IP PRO Bedienungsanleitung - Französisch - 151 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info