Bedienungsanleitung Globe Fire Billy Elegance (Seite 6 von 16) (Englisch)

814084

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Room temperature and humidity

These appliances are designed for use in rooms with a normal humidity and at

temperatures of approximately +5⁰ C to 30⁰C. The appliances are not suitable for use

in damp rooms or for frost protection.

Sounds

Depending on the model some stoves may produce sounds when in use. These

sounds are either from the ventilator, the engine or possible breakdown sounds.

Pellets may also be heard dropping into the fire grate.

Weather conditions

For safe use of the pellet stove it is important to ensure that the chimney can

produce the desired draught. This could be a problem in the transition period

(autumn and spring) or during bad weather conditions. (strong winds, mist etc.)

System requirements

Among other things, the correct settings of a pellet stove are strongly dependent on

the chimney and the flue pipe. Further on in this manual a few important

requirements are mentioned, though these may not be complete as the working of a

stove much depends on personal circumstances.

Good advice from a specialized company or a specialized engineer is always

important.

Type of combustion

Pellets are a solid fuel. Lighting this kind of fuel takes more time than lighting

liquid fuel (for example oil fuel or gas). After starting up the stove the lighting

process takes up to 10 minutes until flames appear. After the warming up

process is completed the appliance adapts automatically to the required

settings. Switching off the stove also takes a few minutes before all the pellets

are burned and the flame is extinguished. The smoke extraction fan is

programmed to continue operating so that any smoke left is sucked out through

the chimney. At the same time the fire grate is cooled down ready to be lit

again.

Description of use

A Globe-Fire pellet stove is a special appliance which is only suitable for

domestic use and only suitable for burning wood pellets of the previously

mentioned standard. When in use the appliance produces warm air in the area

where it is standing. The appliance also radiates heat to the surfaces around it

and to the stove window. The wood pellets are transported automatically to the

fire grate and are burned by an electrical ignition.

Depending on the selected level the correct amount of pellets will be

transported to the fire grate. A regulated amount of air necessary for combustion

is sent to the fire grate. The fuel is burned in the fire grate and flue pipe,

supplying heat to the surroundings. The fumes that are released are drawn up

through the chimney to the outside with the support of the smoke extraction fan.

At certain recommended moments the ash and soot must be removed from the

fire grate. The stove window must also be cleaned. As mentioned before,

regular servicing is necessary.

A dirty stove window is not a defect and is not a reason for restitution.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Globe Fire Billy Elegance Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Globe Fire Billy Elegance

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info