Bedienungsanleitung Godox Quicker 600 IIM (Seite 8 von 9) (Englisch)

656044

Zoom out

Zoom in

Vorherige Seite

1/9

Nächste Seite

mask

sec

to.1

speed

Multi

mask

sec

to.1

speed

Multi

The Buzz Button is used to decide whether there is sound reminder for ready flash after recharging. When the buzz

indicator is displayed on the LCD panel, it means the sound reminder is turned on; if not dislayed, the sound

reminder is turned off.

1. A “BI” sound will be heard when it’s fully charged.

2. A “BI” sound will be heard when the button and the

select dial echo each other.

mask

sec

to.1

speed

Multi

mask

sec

to.1

speed

Multi

mask

sec

to.1

speed

Multi

mask

sec

to.1

speed

Multi

mask

sec

to.1

speed

Multi

mask

sec

to.1

speed

Multi

- 27 -

- 28 -

Optical S1 Secondary Unit Setting

In M manual flash mode, press <S1/S2> button so that this flash can function as an Optical S1 secondary flash with

Optical sensor. With this function, the flash will fire synchronously when the main flash fires, the same effect as that

by the use of radio triggers. This helps create multiple lighting effects.

Optical S2 Secondary Unit Setting

Press < S1/S2> button so that this flash can also function as an Optical S2 secondary flash with Optical sensor in M

manual flash mode. This is useful when cameras have pre-flash function. With this function, the flash will ignore a

single “preflash” from the main flash and will only fire in response to the second, actual flash from the main unit.

QuickerII has a 150W modeling lamp which offers 5% to 100% light adjustment and 2 long lighting modes.

Modeling Lamp’s ON/OFF and Settings:

1. When the modeling lamp is OFF, short press the Modeling Lamp Button to turn it on;

2. When the modeling lamp is ON, short press the Modeling Lamp Button to setting the light brightness. As the

lighting amount is blinking, turn the Select Dial to choose.

● Turn off the Modeling Lamp

Long press the Modeling Lamp Button for 2 seconds to turn it off.

● Choose the Modeling Lamp’s Modes

1. Long press the C.Fn Custom Button for 2 seconds until Fn menu is

displayed.

2. Press the SET Button to choose F4.

3. Turn the Select Dial to choose the Modes:

ON: the modeling lamp will keep this status when triggering;

OFF: the modeling lamp will turn off when triggering;

Modeling Lamp

Slave Trigger Model

Buzz Function

C.Fn Setting Custom Function

Long press the C.Fn Custom

1 Button for 2 seconds until

<Fn> menu is displayed.

Press the <SET> Button to

2 choose Fn function signs.

Turn the Select Dial to change

3 the settings. Short press the

C.Fn Custom Button to exit.

Custom

Function

Signs

Function Setting No. Settings & Description Restrictions

Choose high-

speed ash

ON High-Speed Flash (speed) Mode

OFF Stable Color Temperature

F2 Delay ash OFF, 0.01~30S Trigger as second curtain M/Multi mode

F3 Mask function

OFF Mask function is off

M mode

Mask function is on: when setting 2 times’

triggering as a period, the rst triggering will re

a ash.

Mask function is on: when setting 2 times’

triggering as a period, the second triggering will

re a ash.

Modeling lamp

mode

The modeling lamp will not change its status

when triggering.

OFF The modeling lamp will turn off when triggering.

M/Multi mode

mask

sec

to.1

speed

Multi

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Godox Quicker 600 IIM Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info