Bedienungsanleitung Godox Quicker 600 IIM (Seite 9 von 9) (Englisch)

656044

Zoom out

Zoom in

Vorherige Seite

1/9

Nächste Seite

Memory Function

The device is equipped with memory function for the panel setting. It will help remember the panel setting 3 second

after you set it. When starting up the flash next time, the panel setting will be the same as the status before

powering it off.

Tube Replacement

Shut down the power and remove the power cord before replacing the flash tube and wear insulated gloves. Then,

loosen the iron wire on the tube, keep a balanced hold on the two feet of the flash tube and pull out the old tube

gently. Take down the feet casing from the old tube and put it on the new one. Hold two feet of the new tube, and

target directly towards the two copper outlets, then push them slightly in. Twine the iron wire on the stainless steel

sheet to fix the flash tube.

- 29 - - 30 -

Other Applications

Wireless Control Function

The flash unit is built in with a Wireless Control Port so that you can wirelessly adjust the power level

of the flash and the flash triggering.

To control the flash wirelessly, you need a FT-16 remote control set (on-camera and on-flash). Insert

its receive end into the Wireless Control Port on the flash and insert the transmit end into the camera

hot shoe. Settings made on the hotshoe-mounted transmit and receive ends will be

wirelessly communicated to the flash. Then you can press the camera shutter

release button to trigger the flash. You can also hold the transmit end at

hand to control your off-camera flash.

For full instructions on the use of FT series remote control, see its

user manual.

Sync Triggering

The Sync Cord Jack is a Φ3.5mm plug. Insert a trigger plug here and the flash will be fired synchronously with the

camera shutter.

● Shut down the device immediately when it works abnormally and find out the reason.

● Avoid sudden impacts and the lamp should be dedusted usually.

● It’s normal for lamp being warm when in use. Avoid continuous flashes when it is not necessary.

● Maintenance of all the flashes is up to our authorized maintenance department which can provide original accessories. Users can

replace the flash tube and modeling lamp provided by the manufacturer.

● One year warranty period will be cancelled when any unauthorized maintenance is found.

● If the product had failures or was wetted, it can be continuously used only after it is repaired by professionals.

● Disconnect the power when doing maintenance work or cleaning.

● New changes made to the specifications or designs may not be updated in this manual.

Maintenance

Technical Data

Model Quicker600IIM Quicker400IIM

Flash Mode M/Multi/Hss(high-speed sync)

Guide Number in 1/1 full power

(

m ISO 100, using standard reector)

76 65

Flash Duration

(t0.1)

High-Speed Flash (speed) Mode 1/316s

－

1/28984s 1/416s

－

1/35086s

Stable Color Temperature Mode 1/316s

－

1/4246s 1/416s

－

1/4983s

Color

Temperature

Stable Color Temperature Mode 5600±200K 5600±200K

High-Speed Flash (speed) Mode 5400K~9000K 5400K~9000K

High-Speed Sync Flash (speed) Mode 4600K~5000K 4600K~5000K

POWER 600WS 400WS

Recycle Time Approx. 0.05-0.9s Approx. 0.05-0.7s

Output Level

M 1/128~1/1

Hss 1/16~1/1

Multi 1/128~1/8

Multi Flash Yes

(

max. ash time: 99; max. ash frequency: 30)

Sync Mode

High-speed sync (up to 1/8000s)

rst curtain sync

second curtain

sync

Delay Flash 0.01~30s

MASK Function √

Fan √

Beeper √

Modeling lamp 150W

Slave Trigger Model S1/S2

Display Flash Duration √

Display High qualied LCD panel

• Radio (2.4G) Transmission (X system)

Wireless Function Slave unit

ON/OFF

Controllable Slave Units 16 groups

0~9

，

A,B,C,D,E,F

Transmission Range (approx.) 50m

Channel 32

1~32

Sync Triggering Mode 3.5mm sync line, PC sync socket

，

wireless control port

Dimension

Flash diameterΦ14CM, height of ash with handle 23CM,

length o f ash with lamp cover 41CM

Net Weight Approx. 2.96Kg

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Godox Quicker 600 IIM Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info