Bedienungsanleitung Godox Speedlite TT350 Canon (Seite 8 von 13) (Englisch)

708921

Zoom out

Zoom in

Vorherige Seite

1/13

Nächste Seite

- 22 -

Long Press the <SYNC>

1 button for 2 seconds so that

< > is blinking. Turn the

Select Dial until the < > is

displayed on the LCD panel,

which means the slave unit.

Slave Unit Setting

Press the <SLAVE> Button to

1 choose the group from A/B/C.

Then, press the < MODE >

Button so that the master unit

can work in OFF / TTL / M

flash mode. Choose one of

them as the flash mode of

master unit.

5. Setting the Communication Channel

If there are other wireless flash systems nearby, you can change the

channel IDs to prevent signal interference. The channel IDs of the

master unit and the slave unit(s) must be set to the same.

Long press the <SLAVE>

1 Button for 2 seconds until the

channel IDs is blinking. Turn

the Select Dial to choose a

channel ID from 1 to 16.

Press the <SET> button to

2 confirm.

2. Setting Group Unit’s Flash Mode

Press the <MODE> Button for

2 2 seconds to switch to Multi

mode.

Autoflash Shooting with One Slave Unit

6. TTL: Fully Automatic Wireless Flash Shooting

Master Unit Setting

● Attach a TT350C camera

flash on the camera and set it

as the master unit. (Page 36)

● A/B/C can be set as

TTL mode independently.

Slave Unit Setting

● Set the TT350C that to be

controlled as the wireless

slave unit. (Page 37)

● The slave unit can be set

as A/B/C.

Check the communication

3 channel

● If the master unit and

slave unit(s) are set to a

different channel, set them

to the same channel.

(Page 37)

Position the camera and

4 flashes

● Position the camera and

flashes as the picture

shows. (Page 40)

Check the flash operation

● Press the master unit’s

Test Button< >.

● Then, the slave unit will

fire. If not, adjust the slave

unit’s angle toward the

master unit and distance

from the master unit.

The slave unit might be out of order or fire an unwanted flash

due to the nearby wifi routers or other 2.4G equipments. If in

this case, please adjust the flash’s channel or turn off the 2.4G

equipments.

- 37 -

- 38 -

ZOOM SYNC SLAVE

SET

MODE ZOOM SYNC SLAVE

SET

ZOOM SYNC SLAVE

SET

ZOOM SYNC SLAVE

SET

MODE ZOOM SYNC SLAVE

SET

3. Master Unit's Flash OFF

When the flash attach to

1 camera, enter the external

speedlite control on the camera

menu.

Turn off the master control

2 f l a s h o n t h e c a m e r a .

The < > icon will blink on the

TT350C panel, and the flash

master control unit is disabled.

Select turn on to cancel the

master control unit disabled.

ZOOM SYNC SLAVE

SET

4. Wireless ID Settings

Change the wireless channels and wireless ID to avoid interference for it

can only be triggered after the wireless IDs and channels of the master

unit and the slave unit are set to the same.

Press the <MENU> button to enter C.Fn ID. Press the <SET> button to

choose OFF channel expansion shutdown, and choose any figure from 01

to 99.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Godox Speedlite TT350 Canon Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info