Bedienungsanleitung Gorenje ect 680 al (Seite 15 von 18) (Englisch)

335437

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

Instructions for use, mounting and connection

Switching the hotplate on

Once the hotplate is selected and its indicator

flashes ''0'', you have 10 seconds to select the

desired power setting by pressing either sensor

(+) or (-). Indicator will flash the selected setting,

and after 10 second lapse this setting becomes

default.

If no power setting is selected within 10 seconds,

the indicator ''0'' goes off and the hotplate is

switched off.

Automatic cooking mode

When the automatic cooking mode is activated

the hotplate will operate at maximum power for a

limited period of time (depending upon the power

level required for continuation) and then

automatically switch to the reduced power level to

resume cooking (see chart). It may be switched

on in any of the hotplates for all power

settings except for maximum setting 9.

Select the desired hotplate by touching the

hotplate selection sensor. Indicator ''0'' flashes.

Activate the automatic cooking mode by touching

the (+) sensor. In case setting "9" is not changed

within the next ten seconds the automatic cooking

mode is off. It remains active if you press the (-)

sensor and reduce the power setting to any value

between 8 and 1. This means that the maximum

setting "9" must first be reduced by pressing the

(-) sensor, and then it may be increased by

touching the (+) sensor. The indicator displays

letter ''A'' which remains illuminated for the entire

time the automatic cooking mode is on.

Automatic cooking mode will not function on

power setting "9".

If you wish to check the power setting level of

active hotplates during automatic cooking mode,

touch either (+) or (-) sensor. The indicators of all

active hotplates functioning in automatic cooking

mode will display the current power setting.

Power setting Maximum power time

(in sec.)

182

2 164

3 246

4 328

5 410

682

7 164

8 164

Once the time from the above chart expires, the

function is switched off and the indication "A" is

replaced by the originally selected power setting.

Automatic cooking mode may be deactivated at

any time by pressing the (-) sensor or by setting

the cooking power to ''0''.

Blocking the hob operation

This function mode is intended as a protection

against accidental start or change of heating

power by children or pets. The hob may be

blocked by pressing the relevant sensor for about

2 seconds, illuminating the LED signal lamp

above the sensor. The hob may be blocked both

with the hob switched on or off. The functioning of

the complete hob is blocked, except for the main

hob switch and the blocking sensor. In the

blocked mode all hotplates may be switched off

only by pressing the main ON/OFF hob sensor,

while the blocked mode remains active. In case

you try to activate any particular sensor in the

blocked mode, the blocked operation signal lamp

goes on for a few seconds, warning you that this

option is not possible. Blocked operation may be

deactivated at any time by pressing the relevant

sensor, and the signal LED above the sensor will

go off.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gorenje ect 680 al Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Gorenje ect 680 al

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info