336345
16
Zoom out
Zoom in
Vorherige Seite
1/25
Nächste Seite
GB
Instructions for the
installer
Installation
This appliance is not provided with
a combustion product discharge.
It is recommended that it be in-
stalled in suf ciently aerated
places, in terms of the laws in
force. The quantity of air which is
necessary for combustion must not
be below 2.0 m3/h for each kW of
installed power.
See table of burner power.
Positioning
The appliance can be tted into a
working area as illustrated on the
corresponding gure.
Before positioning the hob,
t the seal
around the
entire periphery of the hole
cut in the worktop.
Gas connection
(Fig. 5) Connect the appliance to
the gas cylinder or to the
installation according to the pre-
scribed standards in force,
and ensure beforehand, that the
appliance matches the type of gas
available.
Otherwise, see “Adaptation to vari-
ous types of gas”.
Furthermore, check that the feed
pressure falls within the values
described on the table:
“User chacteristics”.
Rigid/semi rigid metal
connection
Carry out the connection with
ttings and metal pipes (even ex-
ible pipes) so as to obtain
counter stress the inner parts of
the appliance.
N.B. - when the installation
has been carried out, check the
perfect sealing of the entire
connection system, by using a
soapy solution.
IT
Istruzioni
per l’installatore
Installazione
Questo apparecchio non è prov-
visto di un dispositivo di scarico
del prodotti della combustione.
Si raccomanda che sia installato in
locali suf cientemente areati sec-
ondo le disposizioni di legge vigenti.
La quantità d’aria necessaria alla
combustione non deve essere infe-
riore a 2.0 m3/h per ogni kW di
potenza installato.
Vedi tabella potenze bruciatori.
Posizionamento
(Fig. 4). L’apparecchio è previsto
per essere incassato in un piano di
lavoro come illustrato nell’apposita
gura. Prima di inserire il piano
predisporre la guarnizione di tenuta
su tutto il perimetro della
foratura d’incasso.
Collegamento gas
(Fig. 5) Collegare l’apparecchiatura
alla bombola o all’impianto
secondo le prescrizioni delle norme
in vigore accertandosi preventiva-
mente che l’apparecchiatura sia
predisposta al tipo di gas disponi-
bile. In caso contrario vedi: “Adat-
tamento a diverso tipo di
gas”. Veri care inoltre che la pres-
sione di alimentazione rientri nei
valori riportati nella tabella: “Carat-
teristiche utilizzatori”.
Allacciamento metallico
rigido/semirigido
Eseguire l’allacciamento con rac-
cordi e tubi metallici (anche essi-
bili) in modo da non provocare
sollecitazioni agli organi interni
all’apparecchio.
N.B. - Ad installazione
ultimata controllare, con
una soluzione saponosa,
la perfetta tenuta di tutto
il sistema di collegamento.
FR
Modalités
d’installation
Installation
Cet appareil n’est pas pourvu de
dispositif d’évacuation des produits
de la combustion. On doit donc
l’installer dans des endroits suf-
samment aerés suivant
les dispositions des lois en vigueur.
La quantitè d’air nécéssaire à la
combustion ne doit pas etre
inférieure à 2.0 m3/h pour chaque
kW de puissance installer. Voir
tableau puissances brûleurs.
Positionnement
L’appareil est prévu pour etre encas-
tré dans un plan de travail
comme indiqué dans la g. 4.
Avant d’installer le plan de cuisson,
placer le joint d’étanchéité
sur tout le périmètre de l’ouverture.
Connexion gaz
(Fig. 5) Effectuer la connexion
de l’appareil à la bouteille ou à
l’installation selon les prescriptions
des normes en vigueur s’assurant à
l’avance que l’appareil est reglé pour
le type de gaz disponible. En cas
contraire voir: “Adaptation à un type
de gaz différent”.
Veri er aussi que la pression
d’alimentation correspond aux va-
leurs du tableau: “Caractéristiques
utilisateurs”.
Branchement métallique
rigide/semirigide
Effectuer le branchement
avec des raccords à conduits
métalliques (meme
exibles) de façon à ne pas
provoquer de contraintes
aux organes internes à l’appareil.
N.B.: - Quand l’installation
est terminée, controler,
avec une solution savonneuse,
la parfaite etoncheité
de tout le système de
branchement.
15
GB,IT,FR,...,H,RO.indd 16GB,IT,FR,...,H,RO.indd 16 9.1.2006 13:39:459.1.2006 13:39:45
16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Gorenje gms 2700 p2 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info