Bedienungsanleitung Gorenje rb 6288 obk (Seite 2 von 7) (Englisch)

354184

Zoom out

Zoom in

Vorherige Seite

1/7

Nächste Seite

141903

Instructions for Use

tools. Use only enclosed tools or tools recommended by the

manufacturer.

• For the sake of environment protection - be careful not to

damage the rear wall of the appliance (the condenser unit or

the tubes - for example when moving the appliance) or any

part of the refrigerating system inside the appliance.

• The refrigerating system of the appliance is filled with

refrigerant and oil, so when the appliance is damaged,

handle it with care and dispose it of in compliance with

environmental protecting precautions. (See We Care for the

Environment).

• If the supply cord is damaged, it must be replaced by the

manufacturer or his service agent or a qualified person in

order to avoid hazard.

• The rating plate is inside the appliance or outside on the rear

wall.

The symbol on the product or on its packaging

indicates that this product may not be treated as

household waste. Instead it shall be handed over

to the applicable collection point for the recycling

of electrical and electronic equipment. By ensuring this

product is disposed of correctly, you will help prevent

potential negative consequences for the environment and

human health, which could otherwise be caused by

inappropriate waste handling of thisproduct. For more

detailed information about recycling of this product,

please contact your local city office, your household waste

disposal service or the shop where you purchased the

product.

Disposing of the Worn Out Appliance

• When your appliance finally wears out, dispose it of. If the

appliance has a lock, break it, in order to prevent eventual

accidents (danger of children get locked inside the

appliance).

• The refrigerating system of the appliance is filled with

refrigerant and insulating substances which should be

separately treated and processed. Call your nearest

authorised service agent or specialised servicing centre. If

you don't find one, contact your local authorities or your

distributor. Be careful not to damage the tubes on the rear

wall of the appliance (danger of pollution).

Placing and Installation

Choosing the Right Place

Place the appliance in a dry and regularly ventilated room.

Allowed ambient temperature depends on the model (class) of

the appliance and is stated on the rating plate of the appliance.

Never place the appliance near heat emitting

devices (e.g. cooker, radiator, water heater or similar devices)

and do not expose it to direct sunlight.

The appliance should be positioned at least 3 cm away from

the electric or gas cooker and at least 30 cm away from the oil

or coal stove. If this is not possible, use an appropriate

insulation.

Behind the appliance there should be free space at least 200

cm² wide and above the appliance the high kitchen units

should be at least 5 cm away from the appliance in order to

assure adequate ventilation of the condenser unit.

Class Ambient temperature

SN (sub-normal) from + 10°C to + 32°C

N (normal) from + 16°C to + 32°C

ST (sub-tropical) from + 16°C to + 38°C

T (tropical) from + 16°C to + 43°C

Placing the Self-standing Appliance

• Place the appliance firmly on a solid base. Some appliances

have adjustable feed on the front side; use them to level the

appliance.

• Two spacers attached to the appliance must be fitted onto

the upper edge of the condenser, thus preventing the

appliance from being installed too close to the wall. Spacers

are manufactured for all-purpose function depending on the

distance of the condenser from the wall. Therefore turn

spacers correspondingly and fix them to the appliance.

• The appliance may stand freely or it can be placed next to a

kitchen furniture element or a wall. Mind the space required

to open the door and pull out the drawers and shelves (see

installation diagram).

90 mm

Connection to Power Supply

Connect the appliance with the cable and plug to the power

supply socket outlet with a ground terminal (safety socket).

Required nominal voltage and frequency are indicated on the

rating plate.

The connection to the mains supply and earthing have to be

made according to current standards and regulations. The

appliance resists temporary voltage tolerance up to -6 to +6 %.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gorenje rb 6288 obk Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info