590611
16
Zoom out
Zoom in
Vorherige Seite
1/28
Nächste Seite
16 GMC-I Messtechnik GmbH
8 Resistance Measurement
Set the rotary switch to the
position. Overload is indicated
if no device under test has been
connected: “0.L M”.
Before connecting the device under
test, make sure that it is voltage-
free. Interference voltages distort
measurement results! Perform a
voltage test first if required.
Connect the device under test as
shown in the diagram.
Zero Balancing in the 30 , 300 and 3 kMeasuring Ranges
Resistance at cables, as well as contact resistances, can be eliminated for the
measurement of low-resistance values in the 30 , 300 and 3 k ranges by
means of zero balancing:
Connect the measurement cables to the instrument and connect the free
ends to one another (short circuit the test probes).
Briefly press the FUNC key.
The instrument acknowledges zero balancing with an acoustic signal, and
00
.00 ”, 000.00 ” or “0.0000 kand the ZERO symbol appear at the
LCD.
Resistance measured at the moment the key is pressed is used as a
reference value (max. 2000 digits). This value is automatically subtracted
from all subsequently measured values.
Zero balancing can be cleared:
by pressing and holding the FUNC key, after which clearing is acknowledged
by a twice repeated acoustic signal,
by switching the instrument off.
9 Continuity Testing
With the “acoustic signal” function activated, and exclusively in the 0 to 310
measuring range, the instrument generates a continuous acoustic tone for
measured resistance within a range of 0 to approximately 2 .
Turn the selector switch to the position. The and symbols appear at
the LCD.
Connect the measurement cables to the device under test.
Note!
Continuity testing is very fast (< 50 ms) and is suitable for locating
connections with poor contact (e.g. due to vibration) in automotive
service applications.
R
x
Voltage Drop
16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Gossen Metrawatt METRAport 40S wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info