590611
18
Zoom out
Zoom in
Vorherige Seite
1/28
Nächste Seite
18 GMC-I Messtechnik GmbH
11 Capacitance Measurment
Make sure that the device
under test is voltage-free.
Interference voltages distort
measurement results!
Turn the rotary switch to the
“F” position.
Connect the (discharged!)
device under test to the
and V jacks with the
measurement cables.
Zero Balancing in the 30 nF Measuring Range
Intrinsic capacitance at the measuring instrument and cables can be eliminated
for the measurement of small capacitance values in the 30 nF range by means of
zero balancing:
Connect the measurement cables to the measuring instrument without a
device under test.
Briefly press the FUNC key.
The instrument acknowledges zero balancing with an acoustic signal and
00
.00 ” and the ZERO symbol appear at the LCD. Capacitance measured
at the moment the key is pressed is used as a reference value (max.
2000 digits). This value is automatically subtracted from all subsequently
measured values.
Zero balancing can be cleared:
by pressing and holding the FUNC key, after which clearing is acknowledged
by an acoustic signal,
by switching the instrument off.
12 Frequency Measurement – Duty Cycle Measurement
Turn the rotary switch to the Hz position.
Apply the measured quantity as described under voltage measurement.
Smallest measurable frequencies and maximum allowable voltages are
listed in chapter 15, “Characteristic Values”.
The pulse-period ratio can be ascertained for square-wave signals with the duty
cycle measurement.
Briefly press the multifunction key twice (FUNC). The instrument is switched
to duty cycle measurement. The duty cycle, i.e. the pulse duration of a sig-
nal as a percentage, is displayed at the LCD.
Note
The applied frequency must remain constant during duty cycle measurement.
+
Duty Cycle (%) = ——————— • 100
Pulse Duration
Period
18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Gossen Metrawatt METRAport 40S wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info