Bedienungsanleitung Gossen Metrawatt METRISO PRIME (Seite 3 von 14) (Englisch)

590654

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

GMC-I Messtechnik GmbH 3

Contents Page

1 Safety Precautions .......................................................................... 3

2 Applications .................................................................................... 5

3 Initial Start-Up ................................................................................ 5

3.1 Battery Installation ...........................................................................................5

3.2 Testing the Batteries .......................................................................................5

3.3 Switching the Tester On and Off .......................................................................5

3.4 Analog Display ................................................................................................6

4 Direct and Alternating Voltage Measurements ............................... 6

5 Insulation Resistance Measurement .............................................. 6

5.1 Measurement Procedure .................................................................................6

5.2 Evaluation of Measurement Values ...................................................................7

5.3 Measurements with the Guard Cable (with Accessory Guard 5000A) ..................8

6 Characteristic Values ...................................................................... 8

7 Maintenance ................................................................................. 10

7.1 Batteries .......................................................................................................10

7.2 Housing ........................................................................................................10

7.3 Measurement Cables ....................................................................................10

7.4 Recalibration, Repair, Parts Replacement, and Device Balancing ......................11

8 Z580A Crank Generator Operating Mode ...................................... 11

8.1 Installing the Crank Generator ........................................................................11

8.2 Operating the Crank Generator ......................................................................11

8.3 Measuring Insulation Resistance in the Crank Generator Operating Mode .........11

8.4 Discharging the Device Under Test .................................................................12

8.5 Measuring Voltage in the Crank Generator Operating Mode .............................12

8.6 Characteristic Values .....................................................................................12

9 Accessories (optional) ................................................................. 12

10 Repair and Replacement Parts Service

Calibration Center and Rental Instrument Service ........................ 13

11 Product Support ............................................................................ 13

1 Safety Precautions

This instrument fulfills the requirements of the applicable European and

national EC guidelines. We confirm this with the CE marking. The relevant

declaration of conformity can be obtained from GMC-I Messtechnik

GmbH.

The METRISO PRIME insulation tester is manufactured and tested in

accordance with the following standards:

IEC 61010-1:2010, EN 61010-1:2010, VDE 0411-1:2011

IEC 61557-1, -2, DIN EN 61557-1:2007, -2:2007

VDE 413-1:2007, -2:2008

Hand-held probe assemblies: IEC61010-031:2002+A1:2008,

DIN EN61010-031:2008, VDE 0411-031:2008

For testing and measuring circuits: IEC61010-2-030:2010,

DIN EN 61010-2-030:2011, VDE 0411-2-030:2011

In order to maintain flawless technical safety conditions and to assure safe

use, it is imperative that you read the operating instructions carefully and

thoroughly before placing your instrument into service, and that you follow

all points contained therein.

Opening of Equipment / Repair

The equipment may be opened only by authorized service personnel to

ensure the safe and correct operation of the equipment and to keep the

warranty valid.

Even original spare parts may be installed only by authorized service per-

sonnel.

In case the equipment was opened by unauthorized personnel, no war-

ranty regarding personal safety, measurement accuracy, conformity with

applicable safety measures or any consequential damage is granted by

the manufacturer.

Repair and Parts Replacement by Authorized Service Personnel

Voltage conducting parts may be exposed when the instrument is

opened. The instrument must be disconnected from all sources of voltage

before repair or replacement of parts. If the repair of an open, live instru-

ment cannot be avoided, this may only be performed by trained personnel

who are familiar with the dangers involved.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gossen Metrawatt METRISO PRIME Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Gossen Metrawatt METRISO PRIME

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info