776259
15
Zoom out
Zoom in
Vorherige Seite
1/62
Nächste Seite
GMC-I Messtechnik GmbH 15
5.7 Freely Selectable Parameter Settings or Limit Values
In addition to fixed values, other values can be freely selected
within predefined limits for certain parameters, if the symbol for
the EDIT menu (3) appears at the end of the list of setting values.
Freely Selecting a Limit Value or Nominal Voltage
1 Open the submenu for setting the desired parameter
(no figure, see section 5.6).
2 Select parameter (UL) using the orscroll key
(no figure, see section 5.6).
3 Select a setting value with the help of the icon and the orscroll
key.
4 Select the edit menu: Press the key with the icon.
5 Select the desired value or unit of measure with the LEFT or RIGHT scroll
key. The value or unit of measure is accepted by pressing the key. The
entire value is acknowledged by selecting and then pressing the key.
The new limit value or nominal value is added to the list.
Note
Observe the predefined limits for the new setting value.
New, freely selected limit values or nominal values
included in the parameters list can be deleted/edited at
the PC with the help of ETC software.
If the upper limit value is exceeded, this limit value is used
(65 V in the example), and if the lower limit value is fallen
short of, it’s used (25 V).
5.8 2-Pole Measurement with Fast or Semiautomatic Polarity
Reversal
Fast, semiautomatic polarity reversal is possible for the following
measurements:
Voltage measurement (U)
Loop impedance measurement ZL-PE
Internal line resistance measurement ZL-N
Insulation resistance measurement – RINS
Fast Polarity Reversal
The polarity parameter is set to AUTO.
Fast and convenient switching amongst all polarity variants, or
switching to the parameter settings submenu, is possible by
pressing the IΔN key at the instrument.
Semiautomatic Polarity Reversal in Memory Mode
The polarity parameter is set to AUTO.
If testing is to be conducted with all polarity variants, automatic
polarity changing takes place after each measurement after sav-
ing.
Polarity variants can be skipped by pressing the IΔN key at the
instrument.
Select value / U/M.
Select value / U/M.
Accept value / U/M.
Delete characters.
Save value (to list)
Select editable value.
Select editable value.
Select the EDIT menu.
3
4
L1-N
L2-N
L3-N
L1-L2
L2-L3
L1-L3
L1-PE
L2-PE
L3-PE
N-PE
L+N-PE
L1-N
L2-N
L3-N
L1-L2
L2-L3
L1-L3
ZL-PE ZL-N
L1-PE
L2-PE
L3-PE
RINS
L1-PE
L2-PE
L3-PE
N-PE
L1-N
L2-N
L3-N
L1-L2
L2-L3
L1-L3
U
L1-N
L2-N
L3-N
L1-L2
L2-L3
L1-L3
L1-PE
L2-PE
L3-PE
N-PE
L+N-PE
L1-N
L2-N
L3-N
L1-L2
L2-L3
L1-L3
ZL-PE ZL-N
L1-PE
L2-PE
L3-PE
RINS
L1-PE
L2-PE
L3-PE
N-PE
L1-N
L2-N
L3-N
L1-L2
L2-L3
L1-L3
U
15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Gossen Metrawatt Profitest Intro wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info