Bedienungsanleitung Gram FSD 23 (Seite 8 von 32) (Englisch, Holländisch)

460594

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Switching ON/OFF the freezer

Switching ON the freezer: press and hold

the pushbutton (1). The operation of

switching on the freezer is signalled by

the green light-emitting LED (3), and the

real temperature inside the freezer’s

chamber shall be shown on the display.

Switching OFF the freezer: press and

hold the pushbutton (2).

Temperature inside the freezer

The set and displayed temperatures

are the freezer’s average temperatures.

It should be remembered that the fol-

lowing, among others, impact the tem-

perature of the freezer chamber: the

temperature of the environment, the

level to which the chamber is filled with

food products, frequency of the door

being opened, the level of frost on

cooling elements inside. In an event of

a significant change in any of the

above listed factors, the temperature of

the freezer should be set appropriately,

e.g., if the temperature of the environ-

ment is low, lower the freezer tempera-

Temperature regulation

The temperature in the freezer’s chamber

can be set within the range from -23

up to -16

C. When pressing and holding

the FREEZE pushbutton (4), the set

temperature shall be shown on the

display. When pressing the pushbutton

(7) or pushbutton (8) it is

possible to modify setting of the

temperature inside the freezer.

Every pressing of the pushbutton shall

activate a brief acoustic signal. In case of

the power supply failure or

disconnecting the power supply to the

freezer, the control will keep in the

memory the latest settings after the power

supply has been restored.

ture and wait 24 hours.

Quick freezing

Quick freezing at a low temperature is

important to maintain the quality of the

food products. Quick freezing is activated

by pressing and holding the function

button (9) and pressing the FREEZE

pushbutton (4). The blue light-emitting

LED (10) switches on signalling

activation of the quick freezing function.

You can chose between freezing in 24 or

48 hours:

- by holding the function button (9) and

pressing once the FREEZE

pushbutton (4) you switche on the

24-hours quick freezing function

and “24” is shown on the display,

- by holding the function pushbutton

(9) and pressing twice the FREEZE

pushbutton (4) you switch on the 48-

hours quick freezing function and

“48” is shown on the display,

- the next pressing of the pushbutton

(4) switches off the quick freezing

function and switches off the blue

light-emitting LED.

The quick freeze function will be

automatically disabled after 24 or 48 hours.

After pressing the quick freezing function

pushbutton, the indication “24” or “48” is

displayed for 5 seconds. Afterwards the

real temperature inside the freezer’s

chambers will be shown on the display.

It is recommended to switch on the quick

freezing function (24 or 48 hours) for

approximately 2 hours before loading the

freezer’s chamber with large quantities

of the food products.

Brief temperature variations

Brief temperature variations are normal

and may occur when for example the fresh

food products are stored in the freezer or

when the door is open for a longer time.

t t

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gram FSD 23 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info