470669
36
Zoom out
Zoom in
Vorherige Seite
1/49
Nächste Seite
Grandstream Networks, Inc. GXP21xx User Manual Page 35 of 48
Firmware version: 1.0.1.110 Last Updated: 01/2012
Allow DHCP Option 42
to override NTP server
Default is “Yes”. This allows device gets provisioned for DHCP Option 42 from the
local server automatically.
SSL Certificate
The user specified SSL certificate used for SIP over TLS.
SSL Private Key
The user specified SSL private key used for SIP over TLS.
SSL Private Key
Password
User specified password to protect the private key above.
Distinctive Ring Tone
Select a Distinctive Ring Tone 1 through 3 for the caller ID. The Caller ID can be
configured as a particular caller ID or Alert-Info text.
When a particular call ID is configured in the Caller ID, the selected ring tone will be
used when the incoming call is from the Caller ID. System Ring Tone will be used for
all other calls.
If server supports Alert-Info, the Alert-Info text can be mapped to the 3 customized
ring tones. For example, if you configure the custom ring tone 1 user ID to “priority”,
that ring tone will be used if we receive INVITE with Alert-Info header in the following
format:
Alert-Info:;info=priority
System Ring Tone
System ring tone. Default is North American standard.
Users could adjust system ring tone frequencies and cadences based on local
telecom standard.
Call Progress Tones
Using these settings, users can configure ring or tone frequencies based on
parameters from local telecom. By default, they are set to North American standard.
Frequencies should be configured with known values to avoid uncomfortable high
pitch sounds.
Syntax: f1=val,f2=val[,c=on1/off1[-on2/off2[-on3/off3]]];
- Frequencies are in Hz
- Cadence on and off are in 10ms
- ON is the period of ringing (“On time” in “ms”) while OFF is the period of silence
- In order to set a continuous ring, OFF should be zero. Otherwise it will ring ON ms
and a pause of OFF ms and then repeat the pattern
- Up to three cadences are supported
Intercom User ID
Configure intercom user ID when intercom is used. This is for Account 1.
Disable Call Waiting
Default is “No”. If set to “Yes”, the call waiting feature will be disabled.
Disable Call
Waiting Tone
Default is “No”. If set to “Yes”, the call waiting tone will be disabled.
Disable Direct IP Calls
Default is “No”. If set to “Yes”, direct IP calls will be disabled.
36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Grandstream GXP21xx series wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info