470669
37
Zoom out
Zoom in
Vorherige Seite
1/49
Nächste Seite
Grandstream Networks, Inc. GXP21xx User Manual Page 36 of 48
Firmware version: 1.0.1.110 Last Updated: 01/2012
Use Quick IP Call
Mode
Dial an IP address under the same LAN/VPN segment by entering the last octet in the
IP address.
In the Advanced Settings page there is an option “Use Quick IP-call mode”. Default
setting is “No”. When set to “Yes”, offhook the phone and dial #XXX (X is 0-9 and
XXX <=255), phone will make direct IP call to aaa.bbb.ccc.XXX where aaa.bbb.ccc
comes from the local IP address REGARDLESS of subnet mask.
#XX or #X are also valid so leading 0 is not required (but OK). See Quick IP Call
Mode section for details.
Disable Conference
Default is “No”. If set to “Yes”, conference will be disabled.
Enable MPK Sending
DTMF
Default is No. If set to “Yes”, Multi Purpose keys can be sent as DTMF during the call.
Disable DND Button
Default is “No”. If set to “Yes”, the “DND” button on keypad will be disabled.
Disable Transfer
Default is “No”. If set to “Yes”, transfer will be disabled.
Auto-Attended
Transfer
Default is “No”. If set to “Yes”, the phone will use attended transfer by default.
Configuration via
Keypad Menu
Configures the access control of configurations via the phone keypad menu. There
are three modes:
Unrestricted
Basic Settings Only
CONFIG option will not display in keypad MENU
Constraint Mode
CONFIG, FACTORY FUNCTIONS and NETWORK options will not display in
keypad MENU
Enable STAR key
Keypad locking
Default is enabled. When the phone is in idle screen, press and hold STAR key for 4
seconds and the keypad will be locked.
To unlock the keypad, press and hold STAR key for 4 seconds. Enter the password to
unlock in the prompted window, and then press MENU key to enter.
The password to lock/unlock can be configured. If users forget the password to
unlock it, log into web GUI and change the password. Update and reboot the phone.
When the phone boots up, press and hold STAR key for 4 seconds and enter the new
password to unlock it.
Password to
lock/unlock
Enter the password to lock the keypad in web GUI.
To unlock the keypad, enter the password in the prompted window in the phone’s
LCD screen.
Do not escape “#” as
%23 in SIP URI
Default is “No”. By default, # will be replaced as %23 in SIP URI.
37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Grandstream GXP21xx series wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info