Bedienungsanleitung Graupner MC 22S (Seite 158 von 180) (Englisch)

467112

158

Zoom out

Zoom in

Vorherige Seite

1/180

Nächste Seite

158

NAUTIC

NAUTIC Expert switched functions

For the PPM18 and PPM24 transmission modes

Module required at the transmitter

16-channel NAUTIC Expert Module

Order No. 4108

(up to two modules can be installed)

Method of working

The NAUTIC Expert Module expands one con-

trol function to provide sixteen switched chan-

nels. All eight switches have a centre position, pro-

viding a genuine forward – stop – reverse func-

tion; this requires the use of a switch module, Or-

der No. 3754.1, or a reversing module, Order No.

3754.2, at the receiver. Three of the eight switches

are self-neutralising from both directions, and two

from one direction. The other three switches are

designed for forward – stop – reverse functions,

and are not self-neutralising. A maximum of two

modules can be installed in the transmitter modu-

le wells, giving a total of thirty-two switched func-

tions.

Requirements for connecting NAUTIC Expert

modules to the function inputs CH8 ... CH10:

1. The model memory to be used must ﬁ rst be

erased using the “Erase model” option in the

»Copy / Erase« menu, and programmed to the

“Fixed wing” model type.

2. The transmitter and receiver must be set to

PPM18 or PPM24 transmission mode.

3. The control function selected must not be in

use simultaneously as the input channel or out-

put channel of any mixer, whether »Wing mi-

xers« or »Free mixers«.

4. In the »Control adjust« menu the settings of

the control channel to be used for NAUTIC pur-

poses must be left at the standard default set-

tings, or reset to that status using CLEAR.

5. The “servo travel” of the control channel to be

used for NAUTIC purposes must be set SYM-

metrically to 150% in the »Servo adjustment«

menu and the “travel limit” left at 150%

or be

reset to this value using CLEAR.

6. Make sure that the direction of servo rotation

is standard (not reversed), and check that the

servo centre is at 0%.

(If one of the servos connected to the decoder at

the receiver end “jitters” slightly at full travel, adjust

the servo centre within a range of about -20% to

+20% until the jitter disappears.)

This completes the set-up procedure at the trans-

mitter.

Installing and connecting NAUTIC modules in

the mc-22s transmitter

The modules are installed in vacant module wells

as described in the notes on page 15 of this ma-

nual. Connect the ﬁ ve-pin plug to one of the so-

ckets CH8 to CH10 on the transmitter circuit

board, bearing in mind the requirements outlined

above.

Locate the four-pin plug which terminates the sin-

gle-core wire attached to the NAUTIC Multi-Prop

module, and connect it to the socket on the trans-

mitter circuit board using the interface distributor,

Order No. 4182.3, or the mc-22(s) / mc-24 adap-

tor, Order No. 4184.1, using the adaptor lead, Or-

der No. 4184.4.

The jumpers supplied with the adaptor lead must

be ﬁ tted to the NAUTIC modules installed in the

transmitter.

If a second module is installed, locate the sing-

le-core wire terminating in a four-pin plug, and

connect it to the ﬁ rst module, which is already in-

stalled.

mc-22s transmitter connections

NAUTIC Expert 16-channel module

Order No. 4108

NAUTIC Expert 16-channel module

Order No. 4108

Fit the jumpers

NAUTIC adaptor,

Order No. 4184.4

Adaptor, Order No. 4184.1

mc-22(s)

interface distributor,

Order No. 4182.3

Transmitter interface

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Graupner MC 22S Seite 158

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info