Bedienungsanleitung Graupner MC 22S (Seite 160 von 180) (Englisch)

467112

160

Zoom out

Zoom in

Vorherige Seite

1/180

Nächste Seite

160

NAUTIC accessories

NAUTIC

NAUTIC accessories

Required at the receiver end

Order No.

Module

Note

4159

2 / 16-channel

NAUTIC-Expert

switch module

For each 16-

channel NAUTIC-

Expert module in

the transmitter,

one 2 / 16 chan-

nel NAUTIC Ex-

pert switch modu-

le is required.

4142N

NAUTIC Multi-

Prop decoder

Four servos can

be connected

3941.6

Flat socket with

3-core lead

For connecting

consumer units

drawing up to 0.7

A per switched

channel

3936.11

3936.32

Y-lead, cable

length 110 mm

or 320 mm

For connecting

NAUTIC switch

modules or re-

verse modules

3754.1

NAUTIC switch

module

Direct connection

of two modules

via synchronous

distributor

3754.2

NAUTIC re-

verse module

Parallel connec-

tion to two chan-

nels or to one

channel via syn-

chronous distri-

butor

Speciﬁ cation, NAUTIC Expert switch module,

Order No. 4159

Current drain approx. 3 mAh

Dimensions approx. 69 x 42 x 20 mm

Weight approx. 47 g

Speciﬁ cation, NAUTIC Multi-Prop decoder, Or-

der No. 4142N

Current drain approx. 10 mAh

Dimensions approx. 69 x 42 x 20 mm

Weight approx. 27 g

Connecting equipment to the NAUTIC Expert

module at the receiver

Each switch module can operate up to sixteen

switched functions.

The module can be connected directly to eight

electrical consumer units, such as ﬁ lament bulbs,

LEDs etc. – but not electric motors – with a cur-

rent drain of up to 0.7 A each. See Fig. 1 for batte-

ry connection.

Two switched functions per socket are possible

using the three-core lead, Order No. 3941.6. See

Fig. 2.

NAUTIC switch or reverse modules are available

for electric motors and other electrical consumers

drawing higher currents. See Figs. 3 + 4.

To obtain a forward – stop – reverse function, con-

nect the reverse module to the Expert switch mo-

dule using the synchronous distributor lead, noting

that one plug attached to the reverse module must

be connected the “wrong” way round: ﬁ le off the

edges of the plug slightly to permit this.

An external power supply is required for directly

connected electrical consumer units and for swit-

ching relays, e.g. a GRAUPNER receiver batte-

ry of adequate capacity. Other batteries up to max.

30 V can be connected using the connecting lead,

Order No. 3941.6. In this case take particular care

to maintain correct polarity:

red wire = positive (+)

brown wire = negative (–).

Fig. 1

Battery connection via

adaptor,

Order No. 3941.6

–

Nautic switch module, Order No. 3754.1

Nautic reverse module, Order No. 3754.2

Speciﬁ cations

Switch modu-

le 3754.1

Reverse mo-

dule 3754.2

Exciter voltage 4,8 ... 12 V 4,8 ... 12 V

Max. switched

current

16 A 16 A

Max. switched

voltage

24 V 24 V

Dimensions in

mm approx.

50 x 27 x 26 50 x 30 x 26

Weight approx. 25 g 45 g

Fig. 2

Fig. 3

Fig. 4

Three-core lead with ﬂ at socket,

Order No. 3941.6

Consumer unit,

max. 0,7 A

Consumer unit,

max. 0,7 A

brown

orange

red

NAUTIC reverse

module,

Order No. 3754.2

orangeorange

orange red

Y-lead,

Order No. 3936.11

NAUTIC switch

module,

Order No. 3754.1

Connect lead with

reversed polarity*

Connect lead with

reversed polarity*

Y-lead,

Order No. 3936.11

orangeorange

orange

red

* Bevel edges of plug

as shown

free

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Graupner MC 22S Seite 160

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info