Bedienungsanleitung Graupner MX-16 HoTT (Seite 71 von 200) (Englisch)

467107

Zoom out

Zoom in

Vorherige Seite

1/200

Nächste Seite

Program description: model memories

ULTIMATE

GRAUBELE

STARLET

BELL47G

copy from model:

R08

–––

… then brieﬂy press the SET button of the right-hand

touch-key in the “Copy to model” window. You can now

select the target memory using the arrow buttons 

of the left or right-hand touch-key, and conﬁrm your

choice with SET. Alternatively you can interrupt the

process with ESC. It is possible to overwrite a model

memory which already contains model data.

ULTIMATE

GRAUBELE

STARLET

BELL47G

copy to model:



free



R08

–––

When you conﬁrm the selected model memory by touch-

ing the SET button, the security query appears:

model

ULTIMATE

to be copied ?

YES



free



Selecting NO interrupts the process, and returns you to

the previous page. If you select YES with the  button,

and conﬁrm your choice by touching the SET button,

then the selected model is copied into the chosen target

Caution:

The erasure process is irrevocable. All data in the

selected model memory is reset to the factory

default settings.

Note:

If you wish to erase the currently active model memory

in the basic display, you will be required to deﬁne the

model type “Helicopter” or “Fixed-wing” immediately.

However, if you erase a non-active model memory, then

the message “

free” appears in the Model select

menu.

copy model  model

Use the arrow buttons  of the left or right-hand

touch-key to select the “copy model  model” sub-

menu, then touch the SET button.

select model

l l

import from SD

SWITCHING RF OFF

If this message appears, the transmitter’s RF module is

active.

You can interrupt the process by brieﬂy pressing the cen-

tral ESC button of the left-hand touch-key. Alternatively a

short press of the SET button of the right-hand touch-key

switches the RF circuit off, and the menu you called up

opens. For safety’s sake you should switch the receiving

system off at this point, if it is already operating.

Select the model to be copied using the arrow buttons

 of the left or right-hand touch-key …

model memory.

Note:

When you copy a model memory, the binding data is

copied together with the model data, so that a receiving

system bound to the original model memory can also

be operated with the copy of the memory, i. e. it does not

require another binding process.

Export to SD

Use the arrow buttons  of the left or right-hand

touch-key to select the “Export to SD” sub-menu, then

touch the SET button.

select model

clear model

copy mod–>mod

export to SD

import from SD

Use the arrow buttons  of the left or right-hand

touch-key to select the model to be exported:

ULTIMATE

GRAUBELE

STARLET

BELL47G

export to SD-CARD:

R08

–––

When you conﬁrm the selected model memory with a

brief press of the SET button, this security query ap-

pears:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Graupner MX-16 HoTT Seite 71

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Graupner MX-16 HoTT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info