Bedienungsanleitung Graupner MX-16 HoTT (Seite 72 von 200) (Englisch)

467107

Zoom out

Zoom in

Vorherige Seite

1/200

Nächste Seite

Program description: model memories

model

ULTIMATE

export ?

YES

SD-CARD

You can interrupt the process with NO; if you do this,

you are returned to the starting screen. However, if you

select YES with the  button, and conﬁrm your choice

by touching the SET button, then the selected model is

copied to the SD card.

Notes:

If the warning …•

SD-CARD

INSERT

… appears instead of a model selection, there is no

SD card in the card slot; see page 22.

When you copy a model memory, the binding data is •

copied along with the model data, so that the receiv-

ing system associated with the original model mem-

ory can also be operated using the SAME transmitter

and the copied memory without repeating the bind-

ing procedure.

An exported ﬁxed-wing model is stored on the memo-•

ry card under \\Models\mx-16 with the format “aMod-

elname.mdl” and a model helicopter with the format

“hModelname.mdl”. However, if you export a “name-

less” model, then you will ﬁnd its data stored on the

memory card under “a-” and “hNoName.mdl”.

Some of the special characters used in certain mod-•

el names cannot be accepted due to speciﬁc limita-

tions of the FAT or FAT32 ﬁle system used by memo-

ry cards. During the copy process they are replaced

by a tilde (~) character.

If the memory card already contains a model ﬁle of •

the same name, it will be overwritten without warning.

Import from SD

Use the arrow buttons  of the left or right-hand

touch-key to select the “Import from SD” sub-menu, then

brieﬂy press the SET button.

select model

import from SD

SWITCHING RF OFF

If this message appears, the transmitter’s RF module is

active.

You can interrupt the process by brieﬂy pressing the cen-

tral ESC button of the left-hand touch-key. Alternatively a

short press of the SET button of the right-hand touch-key

switches the RF circuit off, and the menu you called up

opens. For safety’s sake you should switch the receiving

system off at this point, if it is already operating.

Use the arrow buttons  of the left or right-hand

touch-key to select the model to be imported from the

SD memory card:

EXTRA

ALPINA

COBRA

BELL47G

import from SD-CARD:

11/03/10

11/03/11

11/03/12

Notes:

The export date displayed to the right of the model

name is shown in the format “Year/Month/Day”.

When you do this, and brieﬂy press the SET button of

the right-hand touch-key again, an “Import to model:”

window is displayed. Use the arrow buttons  of the

left or right-hand touch-key to select the target memory,

conﬁrm your choice with SET, or press ESC to interrupt

the process. An occupied memory can be overwritten:

ULTIMATE

GRAUBELE

STARLET

BELL47G

import to model :



free



E08

–––

When you conﬁrm the selected model memory by touch-

ing the SET button, this security query is displayed:

model

ULTIMATE

import ?

YES



free



You can interrupt the process with NO; if you do this, you

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Graupner MX-16 HoTT Seite 72

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Graupner MX-16 HoTT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info