Bedienungsanleitung Graupner MX-16 HoTT (Seite 77 von 200) (Englisch)

467107

Zoom out

Zoom in

Vorherige Seite

1/200

Nächste Seite

Program description: base settings - ﬁxed-wing model

is operated by one servo.

„V-tail“: The elevator and rudder functions are

operated by two control surfaces set in a

V-shape, each controlled by a separate

servo. The two-way coupling function for

the rudder and elevator control systems

is automatically carried out by the trans-

mitter software. If necessary, the ratio

of rudder travel to elevator travel can be

adjusted in the “Dual Rate” menu (page

102).

„Delt/FlW“: The mixed elevon (aileron and eleva-

tor) control system requires two or four

separate servos, one or two in each wing.

However, the elevator trim only affects

servos 2 + 3, even if you select “2ail2ﬂ” -

see below.

„2elev sv“: This option is designed for model aircraft

with two elevator servos. When the eleva-

tor stick is moved, the servo connected

to receiver output 8 moves in parallel with

servo 3. The elevator trim lever affects

both servos.

Note regarding “2elev sv”:

In this mode a transmitter control which

is assigned to input 8 in the “Transmitter

control settings” menu is de-coupled

from servo “8”; this is for safety reasons.

Ailerons / Camber-changing ﬂaps

When you select the “Aileron / Flap” line using the arrow

buttons  of the left or right-hand touch-key, you will

see the corresponding input ﬁeld framed:

stick mode

motor at C1

idle re.

tail type normal

cut off +100%–125% 9

aile/flap 1aile

Touch the central SET button of the right-hand touch-

key to highlight the current setting. Now use the arrow

buttons of the right-hand touch-key to select one of the

three options , which are.

“1aile” Both ailerons are actuated by a single

servo.

“1ail1ﬂ” Both ailerons are actuated by a single

servo, and both ﬂaps are actuated by a

single servo,

“2aile” Each aileron is actuated by one servo.

2ail1ﬂ” Aileron actuation as above, but with one

ﬂap servo,

“2ail2ﬂ” Each aileron is actuated by a separate

servo; there are also one or two camber-

changing ﬂap servos.

The mixers and associated adjustment facilities which

appear in the “Wing mixers” menu (see section start-

ing on page 108) vary according to the data you enter

here. The software provides a maximum of twelve

ready-made mixers for up to two aileron servos and two

camber-changing ﬂap servos.

timer

Two timers are shown in the basic display: one stop-

watch and one ﬂight timer:

GRAUBELE

#01

0:00h

stop

flt

0:00

0.0V

5.6V

HoTT

You can assign a physical switch or a control switch to

these two timers in the right-hand column of the “timer”

line, indicated by the switch symbol at the bottom

edge of the screen.

motor at C1

idle re.

tail type normal

cut off +100%–125% 9

aile/flap 2aile

timer

0:00 –––

The assigned switch starts both timers, and also halts

the stopwatch.

The method of assigning a physical switch or a control

switch is described on page 57.

The ﬂight timer, and the saving of telemetry data on

a memory card ﬁtted in the card slot (see page 23),

always starts simultaneously with the stopwatch, but

continues to run even when the stopwatch is halted

(switched off). It can only be stopped by touching the

central ESC button of the left-hand touch-key when the

stopwatch is already halted.

Once the timers are stopped, you can reset both timers

to their initial value by brieﬂy pressing the  or 

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Graupner MX-16 HoTT Seite 77

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Graupner MX-16 HoTT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info