Bedienungsanleitung Graupner MX-16 HoTT (Seite 147 von 200) (Englisch)

467107

147

Zoom out

Zoom in

Vorherige Seite

1/200

Nächste Seite

147

Program description: Telemetry menu

The receiver servo sockets are addressed in se-

quence; this is recommended for use with analogue

servos. At this setting the servos are automatical-

ly operated at a frame rate of 20 ms (30 ms with the

twelve-channel receiver, Order No. 33512) - regard-

less of what is set or displayed in the “PERIOD” line

of the “RX SERVO” display.

SAME•

RX SERVO TEST

ALL–MIN : 1000µsec

ALL–MAX : 2000µsec

ALARM VOLT : 3.8V

ALARM TEMP–:–10°C

ALARM TEMP+: 55°C

TEST : START

CH OUT TYPE:SAME

The receiver servo sockets are addressed in parallel

blocks of four, i. e. channels 1 to 4 and channels 5 to

8 each receive their control signals simultaneously.

This is recommended for use with digital servos, and

especially where multiple servos are employed for

a single function (e. g. ailerons), to ensure that the

groups of servos run absolutely synchronously.

If you are using digital servos exclusively, it is advis-

able to set a value of 10 ms in the “PERIOD” line of

the “RX SERVO” screen, as this enables you to ex-

ploit the fast response of digital servos. If you are us-

ing analogue servos, or a mixture of both types, it is

essential to select “20 ms”!

If you choose the faster setting, please take par-

ticular care when selecting the receiver power

supply: since up to four servos can start moving si-

multaneously, the load on the battery is fairly severe,

so it must be a high-performance type.

SUMO (Sum signal OUT)•

RX SERVO TEST

ALL–MIN : 1000µsec

ALL–MAX : 2000µsec

ALARM VOLT : 3.8V

ALARM TEMP–:–10°C

ALARM TEMP+: 55°C

TEST : START

CH OUTPUT TYPE:SUMO

A HoTT receiver conﬁgured as SUMO constant-

ly generates what is known as a sum signal from the

control signals of all its control channels, and - in the

case of the GR-16 receiver supplied in the set as

standard - makes this available at servo socket 8.

If the receiver’s display shows a two-digit number to

the right of “SUMO” …

RX SERVO TEST

ALL–MIN : 1000µsec

ALL–MAX : 2000µsec

ALARM VOLT : 3.8V

ALARM TEMP–:–10°C

ALARM TEMP+: 55°C

TEST : START

CH OUT TYPE:SUMO 08

… then the active ﬁeld shifts to the right - to channel

select - when you conﬁrm “SUMO” with a brief press

of the central SET button of the right-hand touch-key.

This choice determine the highest of the transmitter

channels contained in the SUMO signal:

RX SERVO TEST

ALL–MIN : 1000µsec

ALL–MAX : 2000µsec

ALARM VOLT : 3.8V

ALARM TEMP–:–10°C

ALARM TEMP+: 55°C

TEST : START

CH OUT TYPE:SUMO 08

You can conﬁrm the pre-set number with a further

brief press of the central SET button of the right-hand

touch-key, or use the arrow buttons to select one

of the other channels between 04 and 16, and then

conﬁrm your choice with SET.

The receiver outputs are addressed in sequence at a

frame rate of 20 ms (30 ms with the GR-24 receiver,

Order No. 33512), even if you have set 10 ms in the

“PERIOD” line of the “RX SERVO” screen page.

Although primarily intended for “satellite mode” with

two HoTT receivers, as described below, the sum

signal generated by the receiver deﬁned as SUMO

can also be used, for example, to control a ﬂybar-

less system, or to control a ﬂight simulator (using the

adapter lead, Order No. 33310).

In …

Satellite mode

… two HoTT receivers are inter-connected using a

three-core connecting lead (Order No. 33700.1 (300

mm) or 33700.2 (100 mm)) using servo sockets de-

termined according to the speciﬁc receiver types. For

example, GR-16 and GR-24 receivers are inter-con-

nected using servo output 8. For more details on this

please refer to the Internet at www.graupner.de.

All channels of the HoTT receiver which is conﬁgured

as SUMO, and is deﬁned as the satellite receiver, are

constantly transferred to the second HoTT receiver -

the primary receiver - via this connection. The prima-

ry receiver must be programmed as the …

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Graupner MX-16 HoTT Seite 147

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Graupner MX-16 HoTT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info