Bedienungsanleitung Graupner MX-16 HoTT (Seite 156 von 200) (Englisch)

467107

156

Zoom out

Zoom in

Vorherige Seite

1/200

Nächste Seite

156

Program description: Trainer system

The Pupil transmitter must always be operated in •

PPM mode, regardless of the type of RF link be-

tween the Teacher transmitter and the model.

If the Pupil transmitter is connected using a DSC •

socket, then you should ALWAYS leave the Pu-

pil transmitter’s On / Off switch at the “OFF” posi-

tion, as this is the only way to ensure that the Pu-

pil transmitter module does not generate an RF

signal even when the DSC lead is plugged in.

Trainer mode operations

Connect the two transmitters using the appropriate

lead; see the overview on the next page: connect the

plug marked “M” (Master) to the socket on the Teacher

transmitter, and the plug marked “S” (Student) (not

present on all leads) to the appropriate socket on the

Pupil transmitter.

Important notes:

It is essential to check that all functions are •

transferred correctly to the prepared model BE-

FORE initiating Trainer mode operations.

If you are using a Trainer lead with three-pole bar-•

rel connectors, on no account connect one of the

ends marked “S” or “M” to a DSC system sock-

et, as it is not suitable for this purpose. The DSC

socket is only suitable for leads ﬁtted with two-

pole barrel connectors.

Checking the system

Operate the assigned Trainer transfer switch:

If the screen display changes from „• T“ to „P“, the

Trainer system is working properly.

However, if the central LED ﬂashes blue / red at a •

high rate, and at the same time the transmitter emits

audible signals, then there is a problem with the con-

nection between Pupil and Teacher transmitter.

At the same time the following warning appears in

the base display …

student

signal

… and in the “Trainer” menu the display changes to

“-P” on the left. If this should happen, note that all the

functions automatically remain under the control of

the Teacher transmitter, regardless of the position of

the Trainer transfer switch; this ensures that the mod-

el is not out of control at any time.

Possible errors:

Pupil transmitter not ready•

The interface in the Pupil transmitter, which replaces •

the RF module, is not connected correctly

Incorrect cable connection: see next section for cable •

selection

Pupil transmitter not set to PPM (10, 18, 24) mode.•

Further possible errors:

Teacher transmitter and HoTT receiver in trainer •

model not correctly “bound”.

Trainer leads

4179.1 For Trainer mode operations between any

two Graupner transmitters equipped with a

DSC socket - identiﬁable by two-pole barrel

connectors at both ends.

3290.7 Trainer lead for connecting a Teacher trans-

mitter with DSC socket (e. g. mx-16 HoTT),

or a transmitter retro-ﬁtted with the option-

al DSC module, Order No. 3290.24, to a

Graupner Pupil transmitter with opto-elec-

tronic Pupil socket - identiﬁable by the letter

“S” at the end with the three-pole barrel con-

nector.

3290.8 Trainer lead for connecting a Pupil transmit-

ter with DSC socket (e. g. mx-16 HoTT)

or a transmitter retro-ﬁtted with the option-

al DSC module, Order No. 3290.24, to a

Graupner Teacher transmitter with opto-elec-

tronic Teacher socket - identiﬁable by the let-

ter “M” at the end with the three-pole barrel

connector.

For more detailed information about the leads and mod-

ules for the Teacher and Pupil transmitters listed on this

page, please refer to the operating instructions supplied

with your transmitter, the main Graupner FS catalogue,

or the Internet at www.graupner.de.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Graupner MX-16 HoTT Seite 156

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Graupner MX-16 HoTT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info