Bedienungsanleitung Graupner MX12 (Seite 71 von 144) (Deutsch, Englisch, Französisch)

30127

Zoom out

Zoom in

Vorherige Seite

1/144

Nächste Seite

the Down key.

7. Access the MIX 1 function by pressing the Up key.

8. Exit the FLAP SYSTEM function by pressing the

Down and Select keys simultaneously.

Differential aileron mixing

In order to use the Differential Function, flaperon or ele-

von (Delta), wing mixing must be selected in the Model

Set-Up Mode and two servos must be used to operate

the ailerons (one on each). In the Function Mode, use

the UP or DN key to select Differential Aileron Mixing

and access by pressing the UP and DN keys simulta-

nously.

Note: The Differential Aileron Mixing Function will

only be shown in the Function Model if either

Flaperon or Delta wing types have been pre-

viously selected in the System Mode.

Function mode AIRPLANE

Differential aileron mixing; Programmable Mixing (1~4)

Indicate present wing

type “FLAPERON“

or “ELEVON“

DIFFERENTIAL VALUE

(NORM 0% - 100%)

To Program Mixing

To flap system

Differential Value Inc-

reases or Decrease

Press to reset Diff-

erential

Value to factory pre-

set. (NORM 100%)

Differential Value

NORM

(DIFF)

SPLIT

50%

100%

Programmable Mixing (1~4)

The mx-12 offers four programmable mixes to be used

for any number of different purposes. This function al-

lows mixing any one channel to any other channel. This

mix can remain on at all times or be switched on and off

in flight using a number of different switches.

Mix numbers 1-3 are of the standard variety, in that the

digital trim for the master channel only affect the master

channel, and not the slave channel. Mix number 4 is

of the “Trim Include“ variety. This mix is used any time

the mix requires the slave channels trim position to be

varied when the master channels digital trim position is

varied. An example for this type of mix would be when

dual elevator or dual aileron servos are used and con-

nected to two separate channels of the system, rather

than using a single channel with a Y-harness.

Each channel of this radio is identified by an abbre-

viated name. The chart below indicates the channel

and its corresponding abbreviation. The channel name

apperaing first is known as the “master channel“ or the

channel to which you want to mix. The second number

is known as the “slave channel“ or the channel that is

being mixed into the master channel. For example,

AILRUD would indicate aileron-to-rudder mixing.

Each time the aileron stick is moved, the aileron will

deflect, and the rudder will automatically move in the

direction and to the value input. Mixing is proportional,

so small inputs of the master channel will produce small

outputs of the slave channel. Each programmable mix

has a mixing “offset“. The purpose of the mixing offset is

to re-define the neutral position of the slave channel.

Accessing the Programmable Mixing Function

Master Channel

Slave Channel

Offset Value

(+/- 125)

Mixing percentages

(+/- 125)

Mixing switch selection

SWITCH

ALWAYS ON: Always Mixing On

RIGHT FWD: Gear SW Forward sideOn

RIGHT REA: Gear SW Rear sideOn

LEFT FWD: FLAP SW Forward sideOn

LEFT REA: FLAP SW Rear sideOn

AILE D/R: AILE D/R SW Position 1On

ELEV D/R: ELEV D/R SW Position 1On

Go to Fail Safe menu

Go to Differential

Change highlighted

selection

Change selected value

Reset selection to

default

Function mode AIRPLANE 23

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Graupner MX12 Seite 71

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Graupner MX12

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info