Bedienungsanleitung Graupner MX12 (Seite 69 von 144) (Deutsch, Englisch, Französisch)

30127

Zoom out

Zoom in

Vorherige Seite

1/144

Nächste Seite

highlighted.

5. Move the appropriate control stick (lever, switch,

etc.) to the right or left of center to the direction of

travel you want to adjust. An arrow to the left of the

travel adjust value will reflect the current position to

be adjusted.

6. After the control stick or switch is placed in the

direction of travel to be adjusted, press the (+) or

(-) key until the proper amount of servo travel is

shown on the LCD. Press the (+) key to increase the

amount of servo travel. Press the (-) key to decrease

the amount of servo travel.

7. Follow the same procedure for the remaining chan-

nels.

8. Access the SUB TRIM function by pressing the

Down key.

9. Access the ELE F MX function by pressing the

Up key.

10. Exit the TRAVEL ADJ function by pressing the

Down and Select keys simultaneously.

Elevator to flap mixing

When this system is active and a value of flaps is input,

the flaps will be deflected each time the elevator stick is

used. The actual flap movement is adjustable for both

up and down elevator. A switch can be assigned to turn

the elevator to flap mixing on or off.

MIXING VALUE (+/- 125%)

Elevator Operating Direction

E-DN: Down side

E-UP: Up side

Mixing SW Selection

SW Display

ALWAYS ON: Always Mixing In

RIGHT FWD: Gear SW Forward

side On

RIGHT REA: Gear SW Rear

sideOn

LEFT FWD: FLAP SW Forward sideOn

LEFT REA: FLAP SW Rear sideOn

AILE D/R: AILE D/R SW Position 1On

ELEV D/R: ELEV D/R SW Position 1On

Go to Ail

Rud Mix menu

Go to Travel

Adjust menu

Change selection

Change value/Select

switch

Reset selection to

Default (adjust to 0%

or ALWAYS ON)

Accessing the Elevator to Flap Function

1. Place the transmitter power switch on the ON positi-

on.

2. Access the Function mode. To do so, press the

Down and Select keys simultaneously.

3. Move the elevator stick in the direction you want to

mix with flaps.

Note: The position indicator will reflect this change by

highlighting the up or down arrow.

4. Press the (+) or (-) key to increase or decrease the

amount of flaps to be mixed. If you want to reverse

the flap travel, press the Clear key, bringing the

mixing value to the factory default (0%), and increa-

se the value using the opposite key (+) or (-) from

the key originally selected.

5. Once you have adjusted the first mixing position (up

or down), place the elevator stick in the opposite

direction and follow Step 5 above to adjust the

second elevator mixing value.

6. Access the switch position by pressing the Select

key. Use the (+) or (-) keys to select from the one of

six switches, or from always on.

7. Access the TRAVEL ADJ function by pressing the

Up key.

8. Access the AIL RUD MIX Mixing function by pres-

sing the Up key.

9. Exit the ELE F MX function by pressing the

Down

and Channel keys simultaneously.

Aileron to rudder mixing

This form of mixing is designed so that when input to the

aileron stick is given, the rudder servo will also move,

eliminating the need to coordinate these controls manu-

ally. When adjusting, if an opposite mixing direction of

the rudder servo is required, simply press the (+) or (-)

keys to change the mixing value from a (+) or (-). This

will reverse the mixing direction of the rudder from its

original direction. The switch used to activate this mix

can also be selected as explained below. The factory

default is a value of 0%

Function mode AIRPLANE

Elevator to flap mixing; Aileron to rudder mixing

MIXING VALUE (+/- 125%)

Mixing SW Selection

SW Display

ALWAYS ON: Always Mixing In

RIGHT FWD: Gear SW Forward side On

RIGHT REA: Gear SW Rear sideOn

LEFT FWD: FLAP SW Rear sideOn

LEFT REA: FLAP SW Rear sideOn

AILE D/R: AILE D/R SW Position 1On

ELEV D/R: ELEV D/R SW Position 1On

Function mode AIRPLANE 21

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Graupner MX12 Seite 69

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Graupner MX12

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info