Bedienungsanleitung Graupner MX12 (Seite 86 von 144) (Deutsch, Englisch, Französisch)

30127

Zoom out

Zoom in

Vorherige Seite

1/144

Nächste Seite

MODE 1 (Throttle at right stick)

Modulation Selection

The Modulation Selection function enables your mx-12

to transmit to a variety of GRAUPNER receivers. You

can select from either S-PCM (Pulse Code Modulation)

or from PPM (Pulse Position Modulation [=FM]).

Model Number Type

Model Name

Modulation

Accessing the Modulation Function

1. Move the power switch to the ON position while

pressing the Down and Select key to access the

System mode.

2. Press either the Up or Down key until MODULATI-

ON appears at the top of the LCD.

3. Press either (+) or (-) keys to change the modulation

type.

4. Pressing the Clear key will also reset the modulati-

on selection to the factory preset S-PCM.

5. Press the Down key to access the MODEL COPY

function.

6. Press the Up key to access the TRAINER function.

7. To exit the MODULATION function, press the Down

and Select keys simultaneously.

Note: In the normal display, the selected modulation

type will appear in the upper right of the LCD.

Go to Switch Select

Go to Modulation

Change trainer mode

Return to Normal

mode

38 System Mode

Stick Mode

The four primary control functions are: aileron, elevator,

rudder and throttle / airbrake for fixed-wing models; roll,

pitch-axis, tail rotor and throttle / collective pitch for heli-

copters, and there are basically four different options for

assigning them to the sticks. The choice of stick mode is

a matter of the individual model flyer’s preference.

Model No.

Type

Stick mode

Direction of control

To Trainer menu

To Modulation menu

Select stick mode /

direction of control

Select stick mode /

direction of control

Return to Normal

mode

This is the procedure for changing stick mode:

1. Hold DOWN and SELECT pressed in simultane

ously while you move the On/Off switch to ON; this

takes you to System mode.

2. Press UP or DOWN until the screen displays

STICK MODE at the top.

3. Press (+) or (-) to change the stick mode.

4. Pressing Clear resets the stick mode to the factory

default (Mode 1).

5. Press the DOWN button to move to the MODULA-

TION function.

6. Press UP to move on to the TRAINER function.

7. You can leave the STICK MODE function by pres-

sing DOWN and Select simultaneously.

Fixed-wing stick mode:

Helicopter stick mode:

elev. down

elev. up

left rudder

right rudder

full throttle

idle

left aileron

right aileron

System Mode

Modulation Selection, Stick Mode

MODE 2 (Throttle at left stick)

MODE 3 (Throttle at right stick) MODE 4 (Throttle at left stick)

full throttle

left rudder

right rudder

idle

elev. down

left aileron

right aileron

elev. up

elev. down

elev. up

left aileron

right aileron

left rudder

right rudder

full throttle

idle

full throttle

left aileron

right aileron

idle

elev. down

elev. up

right rudder

left rudder

MODE 1 (Throttle at right stick)

MODE 2 (Throttle at left stick)

MODE 3 (Throttle at right stick) MODE 4 (Throttle at left stick)

pitch axis

tail rotor

pitch axis

throttle

roll

throttle

pitch axis

roll

pitch axis

roll

throttle

tail rotor

throttle

roll

pitch axis

tail rotor

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Graupner MX12 Seite 86

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Graupner MX12

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info