Bedienungsanleitung Graupner MX12 (Seite 87 von 144) (Deutsch, Englisch, Französisch)

30127

Zoom out

Zoom in

Vorherige Seite

1/144

Nächste Seite

System Mode

Trainer Function

The mx-12 offers a programmable trainer function with

three trainer options:

Normal mode: - In this mode the transmitter acts as a

conventional buddy-box system. The transmitter can be

used as a slave or as a master: however in this mode,

the reversing switches and trims must be adjusted so

the slave transmitter matches the master transmitter. In

normal mode, when the trainer switch is activated, the

student has control of all functions and switches.

Pilot Link: - When Pilot Link mode is used with the

master transmitte, it allows the slave transmitter to be

adjusted to factory defaults. The slave transmitter can

simply be programmed in a model memory not being

used and reset to factory defaults, thus preventing the

need to synchronize the trims and reversing switches on

the slave transmitter. Also when Pilot Link is used, the

student only has control of the 4 basic channels (thrott-

le, aileron, elevator, rudder) while the trainer (master)

retains control of all other functions like gear, dual rate,

programmed mixes, etc. This allows a pilot to have a

test flight on a more complex airplane without having to

remember complex switch positions.

Pilot Link + Slave: - This mode is used only wehen the

mx-12 is being used as a slave transmitter and the other

Master transmitter has a Pilot Link program active. By

selecting Pilot Link + Slave the transmitter is automati-

cally in the correct programming mode to work as a

slave in conjunction with another Pilot Link equipped

transmitter.

System Mode 39

Trainer mode selected

Go to Switch Select

Go to Modulation

Change trainer mode

Return to Normal

mode

Accessing the Trainer Function

1. Move the power switch to the ON position while

pressing the Down and Select keys to access the

System mode.

2. Press either the Up or Down key until TRAINER

appears at the too of the LCD.

3. Press either the (+) or (-) keys to change the Trainer

Type type.

4. Pressing the Clear key will return the trainer function

to the “normal“ setting.

5. Press the Down key to access the MODULATION

function.

6. Press the Up key to access the SWITCH SEL func-

tion.

7. To exit the TRAINER function, press the Down and

Select keys simultaneously.

Note: The slave transmitter must always be in PPM

modulation to operate.

Pilot Link + Slave automatically selects PPM modulation

when activated.

When using other models of transmitters it will be

necessary for the slave transmitter to be in PPM mode

for the mx-12.

For Trainer operations you require one of the follo-

wing accessory leads:

4179.1 Trainer lead for mx-12

For use with Graupner hand-held

transmitters with DSC sockets

3290.8 Trainer lead for mx-12

For use with Graupner mc-… trans-

mitters with trainer sockets

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Graupner MX12 Seite 87

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Graupner MX12

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info